Features:
Kindly note:
This clock Mechanism can not install the second hand.
Easy and simple design
Suitable for repairing, replacing or making a clock
Material: plastic and aluminum
Second hand motion: Step
Accuracy Within ±30seconds deviation each month (in normal temperature)
Battery: one 1.5V Carbon-zinc batteries only,not included.
Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.
Dimensions:
Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 187 mm (7.4 inches)
Total minute hand length: approx. 260 mm (10.2 inches)
Second close nut: approx. 7 mm (0.3 inches)
Package included:
1 x Quartz clock movement
1 x Second close nut
1 x Minute hand
1 x Hour hand
1 X Plastic washer
1 X Brass washer
1 X Brass nut
1 x Metal hook
- Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm).
- Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.
- Center of hole hand size: hour hand is approx. 187 mm (7.4 inch); Minute hand is approx. 260 mm (10.2 inch); Second caps is approx. 7 mm (0.28 inch).
- DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
- Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
- Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm).
- Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.
- Center of hole hand size: hour hand is approx. 187 mm (7.4 inch); Minute hand is approx. 260 mm (10.2 inch); Second caps is approx. 7 mm (0.28 inch).
- DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
- Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
