Features:

Easy and simple design
Suitable for repairing, replacing or making a clock.
Material: plastic and aluminum.
Second hand motion: SWEEP.(Silent Movement)
Accuracy Within ±30second...

Buy Now From Amazon

Features:

Easy and simple design
Suitable for repairing, replacing or making a clock.
Material: plastic and aluminum.
Second hand motion: SWEEP.(Silent Movement)
Accuracy Within ±30seconds deviation each month (in normal temperature).
Battery: one 1.5V Carbon-zinc batteries only,not included.
Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.

Dimensions:

Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 172 mm (6.8 inches)
Total minute hand length: approx. 207 mm (8.1 inches)
Second caps: approx. 7 mm (0.3 inches)

Package included:

1 x Quartz clock movement
1 x Second caps
1 x Minute hand
1 x Hour hand
1 X Plastic washer
1 X Brass washer
1 X Brass nut


  • Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch).
  • Silent Movement total shaft length is 16 mm ( 41/64 inch ),thread length is 8 mm ( 5/16 inch ),suitable for 2 - 6 mm ( 5/64 - 15/64 inch ) thickness clock panel.
  • Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the shaft dimensions.
  • Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.material to make a clock by yourself.
  • Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself.
  • Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch).
  • Silent Movement total shaft length is 16 mm ( 41/64 inch ),thread length is 8 mm ( 5/16 inch ),suitable for 2 - 6 mm ( 5/64 - 15/64 inch ) thickness clock panel.
  • Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the shaft dimensions.
  • Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.material to make a clock by yourself.
  • Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself.

Similar Products

Hicarer 31 mm High Torque Long Shaft Clock Movement with 2 Spade Hands to Fit Dials up to 51.4 cm/ 20 Inches in DiameterMudder Clock Movement Mechanism, 3/ 25 Inch Maximum Dial Thickness, 1/ 2 Inch Total Shaft LengthHicarer High Torque Clock Movement Mechanism with 230 mm/ 9.1 Inch Long Hand (Shaft Length 9/10 Inch/ 23 mm)Youngtown 12888 High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade HandsClock Motor Movement Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (0.9 Inch Shaft, Black Red)Youngtown #12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Kit Sweep Silent Movement White Shaft,3/8 Inch Maximum Dial Thickness, 43/64 Inch Total Shaft Length.(No Hands)