Features:
Good clock replacement:Â Â This kit is good size replacement both in terms of the shaft and the size of the hands. It can be a replacement for your broken clock.Â
Simple style clock movement:Â It can match to diverse colors, patterns,shapes clock panel, it will not stand out, good movement will work well. Simple design, easy to use.Â
Wide application:Â You are enable to use it to repair,replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.Â
Material: plastic and aluminum
Second hand motion: Jump
Accuracy Within ±30 seconds deviation each month (in normal temperature)
Power: 1.5 V AA 1 x battery (not included)Â
Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.
Dimensions:
Case size: approx. 56 x 56 x 17 mm (2.2 x 2.2 x 0.67 inches)
Package included:
1 x Quartz clock movement
1 x Second hand
1 x Minute hand
1 x Hour handÂ
1 X Plastic washer
1 X Brass washer
1X Brass nut
1 x Metal hook
1 x User manual
Kindly note:
- The hour and minute hands had a protective plastic coating that needs to be carefully removed.
- Be careful not to bend the hands with too much pressure.
- Do not tighten the brass hex nut too tight
- Press hard to get all clock hands in place
- Check if all hands are aligned
- Check the size before buying.
- ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
- ✔️Accurate time-keepingmotor:Size- total shaft length is 23 mm (9/ 10 inches), thread length is 15.4mm (3/ 5 inches); suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches)thickness clock panel; Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; powered by a AA battery.
- ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long; The minute hand is about 230 mm/ 9.1 inches in length.
- ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements.
- ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying.
- ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
- ✔️Accurate time-keepingmotor:Size- total shaft length is 23 mm (9/ 10 inches), thread length is 15.4mm (3/ 5 inches); suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches)thickness clock panel; Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; powered by a AA battery.
- ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long; The minute hand is about 230 mm/ 9.1 inches in length.
- ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements.
- ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying.
