Not compatible with Rogue hover board
Feature:
Scooter Fast Charging Charger
Faster and safer charging with our adapter
Intelligent high-speed charging for most 29.4V versions scooters Be safe to use. Overload, Short circuit, Overvoltage Protection.
（Note: Please check for the details and make sure this is the right one you device.）
Switching Power Supply
Model: TP63W294200
Output: 29.4V---2A
Input: 100-200V 50/60Hz 1.2A
Ripple & Noise: 120mVp-p
Working Temperature: -20℃---85℃
Wire length: 1.2m
The length of adapter wire: 1m
Package Include:
1 x 29.4V 2A DC 63W E-Bike Battery Charger
1 x Power Cord
- 29.4V 2A DC, 50-60Hz, Power Max: 63W output DC plug: 5.5*2.1 (mm), Replacement Charger For Swagtron Swagger Electric bike 29.4V Output 2A. Works perfect for Hover Board/ SWAGTRON/ Electric Scooter/ 7S Ebike charger ( 29.4V Version).
- 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking.
- The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
- The charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charge OK, it stop automatically when the battery is full. Warm Tips: To avoid the temperature of your charger too high, please do not charge too long.
- The shell is made by high-quality plastic, smooth appearance with no impurities. Good safety performance, more reliable for you to use. Red light means charging; Green light means fully charged or disconnect.
- 29.4V 2A DC, 50-60Hz, Power Max: 63W output DC plug: 5.5*2.1 (mm), Replacement Charger For Swagtron Swagger Electric bike 29.4V Output 2A. Works perfect for Hover Board/ SWAGTRON/ Electric Scooter/ 7S Ebike charger ( 29.4V Version).
- 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking.
- The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
- The charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charge OK, it stop automatically when the battery is full. Warm Tips: To avoid the temperature of your charger too high, please do not charge too long.
- The shell is made by high-quality plastic, smooth appearance with no impurities. Good safety performance, more reliable for you to use. Red light means charging; Green light means fully charged or disconnect.
