Description:
Faster and safer charging with our adapter,Intelligent high-speed charging for most 42V versions scooters
(Please check for the details and make sure this is the right one you need.)
INPUT SPEC:AC100-240V 50/60HZ 2A
charging voltage: DC42V
charging current: 2A
Charging mode: CC-CV
charge indicator:Red:Charging Green: Charged OK
Charger port: DC5.5mm*2.1mm
product size:132*57*32MM
Cable length: 39.4 In / 100 CM
security protection: OVP/OCP/ Overload protection/ Short-circuit protection
Packing:
42v 2a battery charger*1
US plug cable*1
- Output: 42V 2A( works for 2A,1.5A, 1A,0.5A) ,Replacement for 36V Lithium-ion Battery. Output DC 5.5 *2.1 mm interface（outside diameter of 5.5 mm ,2.5/2.1 mm inside diameter）,NOT 3-Prong Connector/ NOT for 24V 25.2V 29.4V version
- Multiple protection for power supply Battery charger: Overvoltage protection / Overcurrent protection / Overload protection / Short-circuit protection / Over temperature Protection
- LED Indication: Green(Charged full/ no-load), Red(Charging), it stop automatically when the battery is full. The LED will change red when the charger is working. The charger gets little warm during operation, you can put two small blocks under it for better heat dissipation
- Faster and safer Charging with TangsFire charger, Intelligent high-speed charging. The charger automatically detects if the battery is fully charged (if a BMS is installed on the battery) and then turns off.
- More assured to use: Made of PC engineering plastic shell, high temperature and fire‑resistant, durable, sturdy and has a long service life
- Output: 42V 2A( works for 2A,1.5A, 1A,0.5A) ,Replacement for 36V Lithium-ion Battery. Output DC 5.5 *2.1 mm interface（outside diameter of 5.5 mm ,2.5/2.1 mm inside diameter）,NOT 3-Prong Connector/ NOT for 24V 25.2V 29.4V version
- Multiple protection for power supply Battery charger: Overvoltage protection / Overcurrent protection / Overload protection / Short-circuit protection / Over temperature Protection
- LED Indication: Green(Charged full/ no-load), Red(Charging), it stop automatically when the battery is full. The LED will change red when the charger is working. The charger gets little warm during operation, you can put two small blocks under it for better heat dissipation
- Faster and safer Charging with TangsFire charger, Intelligent high-speed charging. The charger automatically detects if the battery is fully charged (if a BMS is installed on the battery) and then turns off.
- More assured to use: Made of PC engineering plastic shell, high temperature and fire‑resistant, durable, sturdy and has a long service life
