MNJ Motor Customized Symbol LED Backlit Push Button ON/OFF Switch

This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on Toyota Sequoia 2008-ON, Toyota Highlander 2...

Buy Now From Amazon

MNJ Motor Customized Symbol LED Backlit Push Button ON/OFF Switch

This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!

It has a face surface size of 1.28" x 0.87" and all symbols are Etched directly onto the switch face using modern high Tech engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MNJ MOTOR New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!

NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.

COMPATIBLE VEHICLES:
# Toyota Sequoia 2008-ON
# Toyota Highlander 2008-ON
# Toyota Tacoma 2012-ON Center ONLY
# Toyota Tundra 2008-ON
# Toyota 4Runner 2010-ON
# Toyota RAV4 2008-2012
# Toyota Yaris 2008

  • PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch
  • SUPREME QUALITY - Laser etched directly onto the push switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
  • STURDY DURABILITY - The push button switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.28" x 0.87". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
  • EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
  • WIDE APPLICATION - This model push switch compatible with Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008
  • PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch
  • SUPREME QUALITY - Laser etched directly onto the push switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
  • STURDY DURABILITY - The push button switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.28" x 0.87". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
  • EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
  • WIDE APPLICATION - This model push switch compatible with Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008

Similar Products

LED Light Push Button Switch with Connector Wire Blue Backlit Kit for Toyota Tundra Tacoma 4Runner-Rear Light SymbolMICTUNING Backlit FOG LIGHTS Symbol Push Button with Wiring Kit ON-OFF Switch for Toyota (Blue, Surface Size 1.28 x 0.87 inches)MICTUNING M0810-T-LLBB LED Push Switch with Connector Wire Kit for Toyota - LED LIGHT BAR Symbol -BlueLED Light Push Switch Blue Backlit On/Off for 2010-2019 Toyota Tacoma Tundra 4Runner-Rear Light SymbolMICTUNING Backlit LED LIGHT BAR Symbol Push Button with Wiring Kit ON-OFF Switch for Toyota (White, Surface Size 1.28 x 0.87 inches)LED Pod Hood Mount Brackets Fits 2010+ Toyota 4RunnerNilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse for Off Road Lights LED Work Light,2 years WarrantyMicTuning M0810-T-LLBWSBL Push Button Switch with Connector Wire Kit for Toyota-LED Light BAR Symbol-Blue