MICTUNING Customized Symbol LED Backlit Push Button ON/OFF Switch This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota ...

Buy Now From Amazon

MICTUNING Customized Symbol LED Backlit Push Button ON/OFF Switch This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on Toyota Sequoia 2008-ON, Toyota Highlander 2008-ON, Toyota Tacoma 2012-ON Center ONLY, Toyota Tundra 2008-ON, Toyota 4Runner 2010-ON, Toyota RAV4 2008-2012, Toyota Yaris 2008. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches! It has a face surface size of 1. 28" x 0. 87" and all symbols are Etched directly onto the switch face using modern high Tech engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle! NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay. COMPATIBLE VEHICLES: # Toyota Sequoia 2008-ON # Toyota Highlander 2008-ON # Toyota Tacoma 2012-ON Center ONLY # Toyota Tundra 2008-ON # Toyota 4Runner 2010-ON # Toyota RAV4 2008-2012 # Toyota Yaris 2008

  • PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car. Gives your vehicle upgraded with this factory look switch
  • HIGH QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
  • STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
  • EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
  • WIDE APPLICATION - The switch compatible with most vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE WITH: # Toyota FJ Cruiser 2007-2015, #Toyota Fortuner 2005-2014, # Toyota Hilux 2005-2014, # Toyota Tacoma 2005-2011, # Toyota Tacoma 2012-2015 (Left Side ONLY), # Toyota Highlander 2001-2007, # Toyota Tundra 2005-2006 (Center Console if equipped), # Toyota 4Runner 2003-2009, # Toyota Prado 120 Series 2003-2009
  • PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car. Gives your vehicle upgraded with this factory look switch
  • HIGH QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
  • STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
  • EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
  • WIDE APPLICATION - The switch compatible with most vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE WITH: # Toyota FJ Cruiser 2007-2015, #Toyota Fortuner 2005-2014, # Toyota Hilux 2005-2014, # Toyota Tacoma 2005-2011, # Toyota Tacoma 2012-2015 (Left Side ONLY), # Toyota Highlander 2001-2007, # Toyota Tundra 2005-2006 (Center Console if equipped), # Toyota 4Runner 2003-2009, # Toyota Prado 120 Series 2003-2009

Similar Products

LED Light Push Button Switch with Connector Wire Blue Backlit Kit for Toyota Tundra Tacoma 4Runner-Rear Light SymboliJDMTOY Hood Scoop Mount 36-Inch LED Ultra Slim Light Bar Compatible With 2014-2020 Toyota Tundra, Includes (1) 108W High Power LED Lightbar, Hood Bulge Mounting Brackets & On/Off Switch Wiring KitiJDMTOY Lower Grille Mount 30-Inch LED Light Bar Compatible With 2014-up Toyota Tundra, Includes (1) 150W High Power CREE LED Lightbar, Lower Bumper Opening Mount Brackets & On/Off Switch Wiring KitLED Pod Hood Mount Brackets Fits 2010+ Toyota 4RunnerRough Country LED Bull Bar (fits) 2007-2020 Tundra | Push Bar Grille Guard | Black | B-T4071Ditch Light Switch For 4Runner 5th Gen 2010 and Newer ToyotaMNJ Motor Blue LED LIGHT BAR Symbol Push Button Switch with Connector Wire Kit for Toyota (Surface Size 1.28 x 0.87 inches)