T04E T3 T4 T3/T4 Turbo TO4E Turbocharger 5 Bolt Downpipe Flange .63 A/R .50 A/R 400+HP Boost Stage Oil Cooled;

T04E T3/T4 .63 A/R 57 TRIM TURBO/TURBOCHARGER COMPRESSOR 400+HP BOOST STAGE III

This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing,
wheel and center section. A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too
small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag.
The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are
also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-5.0L engines up to 800HP.
Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost
pressures are 7psi(.5 Bar) to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar)
of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase
in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane
pump gas (91-92 octane) it is not recommended exceeding 7psi (.5 Bar) of boost. Doing so could result in damaging your engine.

Specifics and Features:

• 100% brand new
• Capable of boosting horse power up to 300+ BHP
• High quality material, cast housing with durable steel
• 4 bolt exhaust flange
• Standard T3 5 bolt downpipe flange pattern
• Intake inlet & outlet: 3" & 2" 

Compressor:

• Trim: 55
• A/R: .5
• Inducer: 50.5
• Exducer: 76 

Turbine:

• Trim: 73
• A/R: .63
• Inducer: 65
  
  
  • Perfect fit for 1.6L-2.5L engines,oil cooled type,for 3.2L-5.0L engines in twin turbo application, capable to 800HP
  • Boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar)
  • Horse Power: Boost Horse Power up to 300+HP
  • Cooling Type: Oil Cooled; Wastegate: External Wastegate
  • Oil Inlet: 1/8 NPT oil inlet; Flange: Standard T3/T4 flange; Boost pressures: 7psi(.5 Bar) to 21psi(1.5 Bar)
  • Perfect fit for 1.6L-2.5L engines,oil cooled type,for 3.2L-5.0L engines in twin turbo application, capable to 800HP
  • Boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar)
  • Horse Power: Boost Horse Power up to 300+HP
  • Cooling Type: Oil Cooled; Wastegate: External Wastegate
  • Oil Inlet: 1/8 NPT oil inlet; Flange: Standard T3/T4 flange; Boost pressures: 7psi(.5 Bar) to 21psi(1.5 Bar)