Hybrid Design
This T3/T4 turbo is created by installing a T4 compressor wheel and housing onto a T3 turbine housing,
wheel and center section.It is a compromise for engines where a T3 turbocharger is too small to reach
the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag.
Highly Capability
The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good
for around 400HP. They are also commonly used in twin turbo applications. In this case those figures
would be doubled 3.2L-5.0L engines up to 800HP.
Recommended boost pressures
Recommended boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar) and boost pressures should not exceed
30psi(2 Bar).14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine.
Specifics and Features:
100% brand new
Capable of boosting horse power up To 420 BHP
Reliable material, cast housing with durable steel
Capable of 8 PSI or 15-25 PSI output at peak power
Internal wastegate setting: 8 PSI
Compressor:
Trim: 55
A/R: .5
Inducer: 50.55mm
Exducer: 76mm
Turbine:
T3 Type Turbine Flange
Trim: 73
A/R: .63
Inducer:65.5 mm
Exducer:55.9 mm
Include:
1*T04E turbocharger
1* Wastegate Actuator
Gasket as picture
Note:
Universal application. Additional parts will be needed to complete install. Please consult professional
turbo installer for details.
