Environmental Friendly
No chemicals or other toxic material are used in this process, it is 100% environmental friendly.
Versatile
It is reusable and can be used on where a smaller suction cup puller couldn't reach.
Easy to Use
Push the cup firmly onto the surface, lock the suction lever, and swirl the suction in broad sweeps.
Specifications:
Material: Aluminum
Cup type: Vacuum flat cups
Max lifting capacity: 170 lbs
Max load for the smaller puller: 17 lbs
Packing Included:
1 x 5" Suction Cup
1 x 2.2" Suction Cup (for Free)
- 5-inch diameter suction cup. Good for auto dent repair, glass and tile lifting. Maximum horizontal capacity is 130 pounds; vertical suction is 110 pounds. Made with a quick-release handle and spring-loaded locking system. Easy to reposition. Sticks to clean, non-porous surfaces. Durable shell. Extra strength rubber seal won't scratch paint
- With a heavy duty body, this suction cup lifts up to maximum 130 pounds in horizontal; 110 pounds in vertical suction
- A lifting suction cup is a useful tool for lifting glass surfaces, tiles, and other delicate materials. By creating a vacuum between the cup and the surface, lifting suction cups allow you to lift from the center of a glass panel, and they can be used in pairs for extra control and weight distribution
- With a 5-inch suction cup, this lifter is best suited for dent pulling and lifting tile, glass etc.
- Warm Reminder: 1.Use the suction cup dent puller from the shallow concave line start a little operation, cannot directly operate in the middle, patient little by little operation, will not leave a trace. 2.Use boiling water, heat gun or hair dryer heat up the dent surface to make sure there is good suction condition before lifting. 3.This dent repair puller will not be used if the car is covered in paint, torn paint, badly cracked or scratched.
- 5-inch diameter suction cup. Good for auto dent repair, glass and tile lifting. Maximum horizontal capacity is 130 pounds; vertical suction is 110 pounds. Made with a quick-release handle and spring-loaded locking system. Easy to reposition. Sticks to clean, non-porous surfaces. Durable shell. Extra strength rubber seal won't scratch paint
- With a heavy duty body, this suction cup lifts up to maximum 130 pounds in horizontal; 110 pounds in vertical suction
- A lifting suction cup is a useful tool for lifting glass surfaces, tiles, and other delicate materials. By creating a vacuum between the cup and the surface, lifting suction cups allow you to lift from the center of a glass panel, and they can be used in pairs for extra control and weight distribution
- With a 5-inch suction cup, this lifter is best suited for dent pulling and lifting tile, glass etc.
- Warm Reminder: 1.Use the suction cup dent puller from the shallow concave line start a little operation, cannot directly operate in the middle, patient little by little operation, will not leave a trace. 2.Use boiling water, heat gun or hair dryer heat up the dent surface to make sure there is good suction condition before lifting. 3.This dent repair puller will not be used if the car is covered in paint, torn paint, badly cracked or scratched.
