GLISTON Pops a Dent Bridge Dent Repair Tools Kit …;

How to use:
1.Wash and dry dent surface with a damp dishcloth
2. Put the glue to gun and heat(also it need about 5-10min )
3. Pull the trigger and apply the drawing gasket with extruded glue (The holes of the gasket should be applied with hot melt glue)
4. Immediately place pad in the center of the dent and hold until sticks
5. Place stem of pad through hole pulling bridge and screw knob
6. Tighten knob until pad pops off
7. Remove excess glue on the car surface.
Packing List:
1 x Bridge Dent Puller
5 x Glue Tabs
1 x White Tap Down Pen
1 x Mini Hot Melt Glue Gun
5 x Yellow Pro Glue Sticks
5 x Black Pro Glue Sticks
2 x Yellow Plastic Shovel
1 x Black Clean Cloth
1 x Empty Alcohol Bottle
1 x Instructions