Dynofit 2 Inch Leveling Lift Kit for Toyota Tacoma (2005-2023), 4Runner (2003-2024) and FJ Curise (2007-2015), Raise Front Suspension 2in, Set of 2Pcs Forged Aluminum Strut Spacers Level Kit;

Dynofit Premium Leveling Lift Kits Series(Strut Spacer Lift)

Real thickness around 1" but real 2" raise due to suspension structure!

(designed on a 2:1 ratio, so once you install the spacers, you will notice that they change the geometry of the lower control arms, steepening the angle of it, and that will account for the additional lift. So With that 1" spacer, you will see a 2" lift )

Truck Fitment

2005-2019 Toyota Tacoma 2WD 4WD (6 lugs wheels only)

2003-2019 4 Runner 2WD 4WD Leveling Kit

2007-2015 FJ Cruise 2WD 4WD 

Not fit 

4 Runner with XREAS Suspension, because difficult for this case

(The strut assembly needs to be rotated 180 degrees after the spacer is installed to put it back in the truck. There is no slack in the XREAS tubing to rotate, so you would have to disconnect tubing, put strut in spring compressor, and rotate the top plate.)

Installation Tips:

• professional installation recommended and alignment necessary
• more easy with spring compressor if installed by yourself(Not must)
• no extra spring for the rear

BRAND GUARANTEE

This Toyota Tacoma 4 RUNNER and FJ Cruise lift kits provides a front 2" suspension lift, we are in charge of your return or refund,  so you should check the fitment before placing an order!

You can contact us by clicking" ask a question" and we will reply and solve your concern in 24 hours!