KSP 6X5.5 Wheel Spacers Fit for Tacoma 4runner, 1.5 inches Forged Hub Centric Adapters Kits with Extended Open Lug Nuts fit 6 Lug Wheels Without Locking hub, Package of 4 (Black 6061 T6 Aluminum);

***KSP Performance Wheel Spacers Adapters W/H High Quality Guarantee***

Please note some vehicles have short studs on their hubs, escipally toyota tacoma, 4 ruuner, fj cruise etc.. In order to safely install this wheel spacer, we can take one of the following ways to solve this problem. one is to change longer studs, another is to buy extended thread lug nuts with shank
SPEC:

Thickness: 1.5 inches / 38 mm
Vehicle Bolt Pattern: 6x5.5'' / 6x139.7 mm
Wheel Bolt Pattern: 6x5.5'' / 6x139.7 mm
Thread pitch: M12X1.5
Hub/Center Bore: 106 mm

COMPATABILITY:(Please check your vehicle compatibility BEFORE buying. If you don't make sure, please feel free to send messages to us):

2001-2018 Toyota Tacoma
2000-2006 Toyota Tundra
1995-2018 Toyota 4Runner
2007-2018 Toyota FJ Cruiser
2004-2018 Toyota Ventury
2001-2007 Toyota Sequoia
2005-2018 Toyota Fortuner
1982-1995 Toyota Land Cruiser
2003-2009 Lexus GX470
2010-2017 Lexus GX460
IMPORTANT NOTICES:

- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle
- Be sure to torque the lug nuts to manufacturer specifications
- Avoid using an impact wrench; improper usage may cause damage to components
- Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
- No returns or exchange once installed
- Installation should only be performed by a trained professional