this product mainly used to solve connection problem caused by insufficient wiring.through physical separation method,one-divided-two for cable is achieved and two devices online can be realized simultaneousy.this product differs from tee,which cannot realixe simultaneouslyonline for both devices.
solve problem of embedding isufficiemt of wiring engineer cable,and realixe one-divided-two for cable.
this deconcentrator is divided existing embedded cable(8 cores) into twogroups(1236/4578) and rtansmitting data separatey. It belongs to purely physical connections,without functions of distributing IP address so it can not be equal to routers or switches.
Each group sub-lines(1 and 2) can reach 100 megabytes per unit respectively and two sets of signals are transmittedwithout interference, which shall be usedin a pair during istallation.Only NO.2 Port can be used when single one is used.
1.Household applications/NO.1 :
Enable IPTV and rouersbe online at the same time,if there is just one cable from weakelectricity box to living room in decoration,while the router placed in weak electricity box and its signal is relatively weak,the routercan be moved to the center of living roomthrough following methodand the router's signal will become much better.
2.Taking routers as loop and transmitsignalasto other devices,if only one ussis left in modem while two rooms are fitted with cables and only one room is equipped with routers,at this time online at another room can be realized by two deconcentrators
3.Engineering approach/NO.1
Connecting two online sets by one cable if your office has already covered a cable and only has one USB,but you want to realize two computers online (or other network devices)at the same time,source must have two USBs
4.Connecting two POE monitors by one cable simultaneously for POE devices of remote transmission
- SinLoon ethernet splitter specially idear for solve the network wifi signal weak and connection problem caused by insufficient wiring: such as the basement, the attic, the remote house, 2 or more devices online.(NOTE: THE PAIR MUST BE USED AT THE SAME TIME, OTHERWISE IT WILL NOT WORK)
- 1-pair rj45 8P8C LAN ethernet splitter connector is compatible with Cat 7 Cat6 Cat5 Cat5e network ethernet cable and can compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer,etc.(NOTE: THESE RJ45 SPLITTER ADAPTER ONLY WORK IN PAIRS.ONE RJ45 SPLITTER ADAPTER BY ITSELF CANNOT BE USED AS A SPLITTER.)
- Please follow the images instructions to use a pair of RJ45 splitter coupler at the same time.The speed of each cable groups (1 and 2) can only reach 100 megabytes.And the signal transmission of two cable groups are not interfered with each other.RJ45-A interface port"1" is corresponding to RJ45-B interface port"1".RJ45-A interface port"2" is corresponding to RJ45-B interface port"2".They can't be reversed.
- 100Mbps RJ45 ethernet adapter divide original embedded ethernet cables (8pins) into two groups (1236/4578). Two groups respectively transmit data with purely physical connection which don't have the function of the assign IP addresses.（NOTE: ONLY NO.2 PORT WORK IF SINGLE ONE ADAPTER IS USED.）
- RJ45 Splitter adapter is not the same as a network router or network switch without the function of the assign IP addresses.
- SinLoon ethernet splitter specially idear for solve the network wifi signal weak and connection problem caused by insufficient wiring: such as the basement, the attic, the remote house, 2 or more devices online.(NOTE: THE PAIR MUST BE USED AT THE SAME TIME, OTHERWISE IT WILL NOT WORK)
- 1-pair rj45 8P8C LAN ethernet splitter connector is compatible with Cat 7 Cat6 Cat5 Cat5e network ethernet cable and can compatible with ADSL, hubs, switch, TV, set-top box, router, wireless device, computer,etc.(NOTE: THESE RJ45 SPLITTER ADAPTER ONLY WORK IN PAIRS.ONE RJ45 SPLITTER ADAPTER BY ITSELF CANNOT BE USED AS A SPLITTER.)
- Please follow the images instructions to use a pair of RJ45 splitter coupler at the same time.The speed of each cable groups (1 and 2) can only reach 100 megabytes.And the signal transmission of two cable groups are not interfered with each other.RJ45-A interface port"1" is corresponding to RJ45-B interface port"1".RJ45-A interface port"2" is corresponding to RJ45-B interface port"2".They can't be reversed.
- 100Mbps RJ45 ethernet adapter divide original embedded ethernet cables (8pins) into two groups (1236/4578). Two groups respectively transmit data with purely physical connection which don't have the function of the assign IP addresses.（NOTE: ONLY NO.2 PORT WORK IF SINGLE ONE ADAPTER IS USED.）
- RJ45 Splitter adapter is not the same as a network router or network switch without the function of the assign IP addresses.
