Drone, Metakoo M1 Mini Drone 2.4GHz 6-Axis Double Battery for Beginners and Kids Drone with 360°Full Protection, Altitude Hold, 3D Flips, Headless Mode, 3 Speed Modes Functions;

HOW TO TAKE OFF
1. Power On: Switch on the controller and drone. Keep the controller and the drone head (in red) in the same direction
2. Synchronization: Push the left throttle forward and then back, and the 4 blinking LED lights will turn stable
3. Direction Calibration: Simultaneously push both joysticks in↘↙direction for 2 seconds. The LED will flash quickly and then remain stable again
4. Drone Start: Push both joysticks in↙↘direction and then release them when the 4 propellers start to rotate
5. Take-off: Push the left throttle forward slowly. When the drone reaches about 1.5 meters in height, release the throttle to fly it steadily. Then freely change the directions through the right joystick

FLYING TIPS
☁ Emergency Stop: Push the joysticks in↙↘direction to make the drone land
☁ Switch To Headless Mode : Make sure the controller and drone head in the same direction before switching
☁ Hovering: Pressing the left throttle for 3 seconds to make the mini drone hovering in the air
☁ Red propellers should be installed on the front and black two on the rear. Notice: A-A, B-B

SPECIFICATIONS
Material: ABS plastic
Engine: Brushed Engine
Frequency: 2.4GHz
Fling Time: About 5-7 min
Charge Time: Approx. 50 min
LED Lights: 4 LEDs
Drone Battery: 3.7 V 220 mAh Li-Po
Remote Control Distance: Approx. 30 - 50m
Controller Battery: 2 x 1.5V AAA batteries (not included)

PACKAGE CONTENT
1 x Metakoo M1 Mini drone
1 x Controller (without batteries)
2 x Li-po Batteies
4 x Replacement Propellers
1 x USB Charging Cable
1 x User Manual

Replacement propellers, batteries and accessories for Metakoo M1 are available on Amazon.
Please feel free to contact us if you have any questions or problems. We are always here to help you.