This easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling; it fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling. The simple assembly includes all metal parts and a kit of assembly screws and hardware. The two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. Attaches to your projector with 3 or 4 legs of the gimbal spider mount. The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span. Typical mounting screws are supplied with this mount but with some projectors, you may need to use the mounting screws included with your projector. Fits Epson, Optoma, Benq, Viewsonic and most other projectors. Projector drop from the ceiling is only 10 inches. Includes an American written installation manual. Accessory 8 inch extension rods can be added to lower the projector. Video Projector is not included, it is shown for demonstration purposes. NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.
- Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
- Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch; projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install
- Includes an AMERICAN WRITTEN installation manual with illustrations and photos
- Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole
- Projector is not included; it is shown for demonstration purposes only
- Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
- Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch; projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install
- Includes an AMERICAN WRITTEN installation manual with illustrations and photos
- Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole
- Projector is not included; it is shown for demonstration purposes only
