This easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling. Projector drop from the ceiling is either 10 or 18 inches. It fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors. The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span. The simple assembly includes all metal parts and a comprehensive kit of assembly screws and hardware. The two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. The suspension rod is either 8 or 16 inches long and the mounting bracket is Includes an American written installation manual. Video Projector is not included, it is shown for demonstration purposes. NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.
- Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
- Easy to install on a drop ceiling with 1 inch wide T-Bar frame, with scissor clamp and two (2) 8 inch aluminum suspension rods; the two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
- Includes American-written installation manual with illustrations and photos; simple assembly includes all metal parts and comprehensive kit of screws and hardware
- The suspension rod is 8 or 16 inches long and the mount bracket is gunmetal gray; projector drop from the ceiling is either 10 or 20 inches
- Projector is not included, it is shown for demonstration purposes only; includes an installation guide (see link below under "Technical Specification")
- Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
- Easy to install on a drop ceiling with 1 inch wide T-Bar frame, with scissor clamp and two (2) 8 inch aluminum suspension rods; the two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
- Includes American-written installation manual with illustrations and photos; simple assembly includes all metal parts and comprehensive kit of screws and hardware
- The suspension rod is 8 or 16 inches long and the mount bracket is gunmetal gray; projector drop from the ceiling is either 10 or 20 inches
- Projector is not included, it is shown for demonstration purposes only; includes an installation guide (see link below under "Technical Specification")
