LOCTITE 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools..
Your benefits
Medium strength
Medium viscosity
Quick fixture time
Easy to apply
Thixotropic to reduce adhesive migration
Warning
Always read material safety data sheet and technical data sheet before using the product. Keep away from children.
Please Note: The Volume in the bottle/tube is as described, but company has increased the size of the bottles then the normal for some safety norms during the shipment.
- Prevents loosening from shock and vibration and Permanently locks studs and press fits.
- No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone.
- Can be used on various sizes of fasteners - reduces inventory costs.
- Medium strength thread locker for fasteners up to 3/4". Cures reliably even on stainless steel. Tolerant of oil and other contamination. Protects threads from rust and corrosion. Parts can be disassembled with hand tools.
- Application: 1. Clean all surfaces. 2. Use primer/activator for inactive substrate, large gap filling or low temperature cure. 3. Shake well befor use. 4. Apply sufficient product onto the bolts at the nut engagement area. 5. Assemble and tighten as required. 6. Product cures in absence of air and presence of metal.
- Prevents loosening from shock and vibration and Permanently locks studs and press fits.
- No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone.
- Can be used on various sizes of fasteners - reduces inventory costs.
- Medium strength thread locker for fasteners up to 3/4". Cures reliably even on stainless steel. Tolerant of oil and other contamination. Protects threads from rust and corrosion. Parts can be disassembled with hand tools.
- Application: 1. Clean all surfaces. 2. Use primer/activator for inactive substrate, large gap filling or low temperature cure. 3. Shake well befor use. 4. Apply sufficient product onto the bolts at the nut engagement area. 5. Assemble and tighten as required. 6. Product cures in absence of air and presence of metal.
