Machinist's Thin Parallel Bar Set

This stainless streel precision machinist square is perfect for the professional machinist, meticulous wood worker, or the DIY perfectionist. It is cut and ground from a solid blank of 6 mm (.220 inch) thick stainless steel. All faces and edges are ground and lapped for straightness and parallelism. There is a groove milled in the inner corner to provide clearance for burrs and debris. Manufactured to strict DIN 875/0 standards and guaranteed square to within 8 microns or 0.0005 inches (that's 5 ten-thousandths of an inch).

2-1/2” tall x 1 1/2” wide; blades are 1” wide by .220” thick
Machined from a solid blank of stainless steel (will never rust or go out of square)
DIN 875/0 German standard squareness accuracy for both inside and outside to w/in 8 microns or 0.0003”
Wide enough to stand on its edge on its own
Comes packed in a cardboard box
2-1/2” tall x 1 1/2” wide; blades are 1” wide by .220” thick
Machined from a solid blank of stainless steel (will never rust or go out of square)
DIN 875/0 German standard squareness accuracy for both inside and outside to w/in 8 microns or 0.0003”
Wide enough to stand on its edge on its own
Comes packed in a cardboard box

Top WaffleMaker Reviews

Taytools 7464244 Machinist Engineer Solid Mini Stainles Steel Square 2-1/2 x 1-1/2 x .220 Inches Thick DIN 875/0 (Square w/in - 0.0003 Inches);