FastCap Glu-Bot Glue Bottle (16 Ounces)

This stainless streel precision machinist square is perfect for the professional machinist, meticulous wood worker, or the DIY perfectionist. It is cut and ground from a solid blank of 6 mm (.220 inch) thick stainless steel. All faces and edges are ground and lapped for straightness and parallelism. There is a groove milled in the inner corner to provide clearance for burrs and debris. Manufactured to strict DIN 875/0 standards and guaranteed square to within 8 microns or 0.0005 inches (that's 5 ten-thousandths of an inch).

6 1/4” tall x 4” wide; blades are 1” wide by .220” thick
Machined from a solid blank of stainless steel (will never rust or go out of square)
DIN 875/0 German standard squareness accuracy for both inside and outside to w/in 8 microns or 0.0003”
Wide enough to stand on its edge on its own
Comes packied in a cardboard box
6 1/4” tall x 4” wide; blades are 1” wide by .220” thick
Machined from a solid blank of stainless steel (will never rust or go out of square)
DIN 875/0 German standard squareness accuracy for both inside and outside to w/in 8 microns or 0.0003”
Wide enough to stand on its edge on its own
Comes packied in a cardboard box

Top WaffleMaker Reviews

Taytools 7464220 Machinist Engineer Solid Stainless Steel Square 6 1/4” x 4” x .220” Thick DIN 875/0 (Square w/in - 0.0003”);