Applications:
IP phones like Polycom, Cisco, Yealink
WiFi Access points, IP Cameras and 802.3af
12 volt, poe devices - use a 48 volt supply (- please see our video on this topic)
proven reliability since 2011
10/100/1000 data rate
Wall mount
8 data in, 8 Data + PoE out standard RJ45
650 ma self resetting fuse on each port.
Power and data share wires (36+ and 12 -)
this is not a switch - you use it to add PoE to any switch or router
extend power to 328 ft or 100 meters
power is on all the time - same voltage to each port
2.1mm DC connector with LED status light
4 pin Phoenix connector for industrial applications
Power Supplies Available Separately
48 volts DC, 1.25 amps, 60 watts
48 volts DC, 2.5 amps, 120 watts
56 volts DC, 2.2 or 1.1 amps / 120 or 60 watts
Other products from WiFi-Texas
WT-GPOE-8-48v60w with power supply included
WS-GPOES-8-7-48v60w with integrated switch
WT-GPOE-4-48v48w for ports
WS-GPOE-6-24v60w for Mikrotik gigabit
WS-GPOE-16-48v120w for double the ports
WS-PoE-Tester to display power used by a device
WT-AF 5 and 12 volt step down converters for non-PoE things
More info and Data sheets at our web site
- Simplify installations, cut costs, and instantly upgrade your network to PoE using this unmanaged midspan passive PoE injector with 8 Data In (LAN) ports, 8 Data + Power Out (PoE) ports, and 10/100/1000 Gigabit data capability.
- Supply continuous Power over Ethernet for up to 8x 802.3af or at devices like IP security cameras, VoIP phones, WiFi Access Points, and other low voltage devices. Gigabit PoE injector delivers transparent VLAN passthrough.
- With built-in wall tabs, this Passive PoE Midspan can be mounted to the wall to save valuable desk or rack space. The front facing design makes it easy to access ports from a wall mount position instead of a rack mount.
- This PoE power injector has dual power inputs: Use with a 48v-56v DC power supply for IEEE 802.3af or at applications. Or, directly wire a 240w power supply to the green Phoenix connector and deliver up to 30w per port for 802.3at devices.
- Plug and play: Add PoE to a non-PoE switch. Compatible with your current Gigabit switch or router. Backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Please call 512 479 0317 for assistance.
- Simplify installations, cut costs, and instantly upgrade your network to PoE using this unmanaged midspan passive PoE injector with 8 Data In (LAN) ports, 8 Data + Power Out (PoE) ports, and 10/100/1000 Gigabit data capability.
- Supply continuous Power over Ethernet for up to 8x 802.3af or at devices like IP security cameras, VoIP phones, WiFi Access Points, and other low voltage devices. Gigabit PoE injector delivers transparent VLAN passthrough.
- With built-in wall tabs, this Passive PoE Midspan can be mounted to the wall to save valuable desk or rack space. The front facing design makes it easy to access ports from a wall mount position instead of a rack mount.
- This PoE power injector has dual power inputs: Use with a 48v-56v DC power supply for IEEE 802.3af or at applications. Or, directly wire a 240w power supply to the green Phoenix connector and deliver up to 30w per port for 802.3at devices.
- Plug and play: Add PoE to a non-PoE switch. Compatible with your current Gigabit switch or router. Backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Please call 512 479 0317 for assistance.
