Add gigabit PoE to any Switch
• Proven reliability
• Mix 10/100/gigabit data and power on the same cable
• Wall Mounted PoE injector for 4 devices
• Power 802.3af devices by connecting a 48v or 56v power supply
• 4 data in, 4 Data + PoE out
• this is not a switch - you use it to add PoE to any switch or router
• extend power to 328 ft or 100 meters
• Power is on all the time
No power supply included
• We recommend our 48 volts DC, 1 amp, 48 watts Power Supply
• Power per port limited to 650 ma - self resetting fuses
• 2.1mm x 5.5mm DC power jack and 4 pin Phoenix connector
Description
These devices provide power and data in the same Ethernet cable using pins 1,2 and 3,6. (802.3af Mode A) All devices receive the same voltage. Check device specs for power needs, it is under 4 watts for most phones, other devices need more.
Applications: • IP phones like Polycom, Cisco, Yealink
• WiFi Access points
• IP Cameras like Hikvision
• any 802.3af Device
• 12 volt, poe devices (please see our video on this topic)
• USB, 5v and 12v , non-poe devices - please see our active splitters
Other products from WiFi-Texas
• Also see our 10/100 and rackmount versions and switches
• WS-GPOES-8-7-48v60w with integrated switch
• WS-POE-8-48v60w for 10/100 speed data
• WS-GPOE-16-48v120w for more ports
• WS-POE-12-48v120w for 10/100 speeds and high power
• WS-PoE-Tester to display power used by a device
• WT-AF 5 and 12 volt splitters
• Full details and data sheet at http://wifiqos.com/
- Simplify installations with a multi-port PoE midspan injector/adapter. Our 4 port PoE injector features 4 Data In (LAN) ports with 4 Data + Power Out (PoE) ports. The unit includes installation tabs for easy wall mounting. See bundles for power supply options.
- Supply continuous reliable Power over Ethernet for up to 4 passive 802.3af or 802.3 at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification.
- PoE injector compatible with IEEE 802.3af and 802.3at devices. Mode A Negotiation shares data and power on pins 1,2(-) / 3,6(+). Passive "Always On" power means all devices receive the same voltage (48v).
- Plug and play. This gigabit injector offersis compatible with your 10/100/1000 Mbps network switch or router delivering lightning fast wired speeds with no loss of signal quality via 4 Data In ports and 4 Data + Power out ports.
- All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
- Simplify installations with a multi-port PoE midspan injector/adapter. Our 4 port PoE injector features 4 Data In (LAN) ports with 4 Data + Power Out (PoE) ports. The unit includes installation tabs for easy wall mounting. See bundles for power supply options.
- Supply continuous reliable Power over Ethernet for up to 4 passive 802.3af or 802.3 at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification.
- PoE injector compatible with IEEE 802.3af and 802.3at devices. Mode A Negotiation shares data and power on pins 1,2(-) / 3,6(+). Passive "Always On" power means all devices receive the same voltage (48v).
- Plug and play. This gigabit injector offersis compatible with your 10/100/1000 Mbps network switch or router delivering lightning fast wired speeds with no loss of signal quality via 4 Data In ports and 4 Data + Power out ports.
- All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
