Fitments:
1967-1973 Ford Mustang
1994-2014 Ford Mustang
2007-2011 Ford Edge
2003-2004 Ford Mach 1
1991-2007 Ford Crown Victoria
1982-1990 Ford Bronco (Does not fit XLT Model)
1981-2011 Ford Ranger (2WD/4WD Models, Will not fit on Front Hub)
1991-2010 Ford Explorer (2WD Models, Will not fit on Front Hub)
1984-1992 Lincoln Mark 70
1982-2004 Lincoln Town Car
2003-2010 Lincoln Aviator
1996-2010 Mercury Mountaineer
1991-1994 Mazda Navajo
1998-2001 Mazda B2500
1994-2007 Mazda B3000
1994-2009 Mazda B4000
Package Including
2 Wheel Spacers + 10 Lug Nuts
- Compatibility List Included : HUBCENTRIC Wheel Spacers 5X4.5 Fit for 1984-1992 for Mark 70 1982-2004 for Lincoln Town Car 1967-1973 for ford Mustang 2007-2013 for Ford Edge || 2010-2014 for Ford Taurus
- Installation with Confidence : 5 LUG Wheel Spacers HUBCENTRIC 5X4.5 TO 5X4.5 WHEEL SPACERS with Thickness:2" or 50mm,Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm,Inner Diameter:70.5mm,Thread Pinch:1/2"x20;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Superior Safety And Stability : Hubcentric wheel spacers 5x4.5 WHEEL SPACERS 2in Hubcentric design- support and center the wheel to better resist impact loads from different road conditions and eliminate the r-isk of vibration.Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub,ensuring precise wheel fitment while el-iminating risks from vibration
- Strict Quality Performance : 5x114.3 WHEEL SPACERS HUBCENTRIC are CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- Check before You Purchasing : WHEEL SPACERS 5X4.5 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 2 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.5mm
- Compatibility List Included : HUBCENTRIC Wheel Spacers 5X4.5 Fit for 1984-1992 for Mark 70 1982-2004 for Lincoln Town Car 1967-1973 for ford Mustang 2007-2013 for Ford Edge || 2010-2014 for Ford Taurus
- Installation with Confidence : 5 LUG Wheel Spacers HUBCENTRIC 5X4.5 TO 5X4.5 WHEEL SPACERS with Thickness:2" or 50mm,Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm,Inner Diameter:70.5mm,Thread Pinch:1/2"x20;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Superior Safety And Stability : Hubcentric wheel spacers 5x4.5 WHEEL SPACERS 2in Hubcentric design- support and center the wheel to better resist impact loads from different road conditions and eliminate the r-isk of vibration.Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub,ensuring precise wheel fitment while el-iminating risks from vibration
- Strict Quality Performance : 5x114.3 WHEEL SPACERS HUBCENTRIC are CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- Check before You Purchasing : WHEEL SPACERS 5X4.5 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 2 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.5mm
