Fitments:
1964 - 1973 Ford Mustang (5-Lug vehicles only)
1994 - 2014 Ford Mustang
2007 - 2014 Ford Edge
2003 - 2004 Ford Mach I
1991 - 2007 Ford Crown Victoria
1982 - 1990 Ford Bronco (Excludes XLT Model)
1981 - 2011 Ford Ranger (because of our hubcentric lip, this may not fit on the front hub. Please message us for details)
1995 - 2010 Ford Explorer andamp; Sport Trac (because of our hubcentric lip, this may not fit on the front hub of 2WD models. Please message us for details)
1984 - 1992 Lincoln Mark 7 (MK7)
1982 - 2004 Lincoln Town Car
2003 - 2010 Lincoln Aviator
1996 - 2010 Mercury Mountaineer
1991 - 1994 Mazda Navajo
1998 - 2001 Mazda B2500
1994 - 2007 Mazda B3000
1994 - 2009 Mazda B4000
Package Including
2 Wheel Spacers + 10 Lug Nuts
- Compatibility List Included : 5x4.5 Wheel Spacers 1.25 INCH Wheel Spacers 5x114.3 compatible with 1994-2014 for Mustang 2007-2014 for Edge 2007-2014 for Edge 2003-2004 for Mach I
- Installation with Confidence : Wheel Spacers 5x4.5 to 5x4.5 with Thickness:1.25"or 32mm;Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Inner Diameter:70.5mm;Thread Pinch:1/2"x20;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Superior Safety And Stability : Hubcentric wheel spacers 5x114.3 WHEEL SPACERS 1.25 inch - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- Strict Quality Performance : The 5x4.5 WHEEL SPACERS HUB CENTRIC 1.25" WHEEL SPACER 5 LUG are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
- Check before You Purchasing : HUBCENTRIC 5x4.5 wheel spacers 1.25IN Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.5mm,advise torque specs at 75-85 Ft/Lbs
- Compatibility List Included : 5x4.5 Wheel Spacers 1.25 INCH Wheel Spacers 5x114.3 compatible with 1994-2014 for Mustang 2007-2014 for Edge 2007-2014 for Edge 2003-2004 for Mach I
- Installation with Confidence : Wheel Spacers 5x4.5 to 5x4.5 with Thickness:1.25"or 32mm;Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Inner Diameter:70.5mm;Thread Pinch:1/2"x20;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Superior Safety And Stability : Hubcentric wheel spacers 5x114.3 WHEEL SPACERS 1.25 inch - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- Strict Quality Performance : The 5x4.5 WHEEL SPACERS HUB CENTRIC 1.25" WHEEL SPACER 5 LUG are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
- Check before You Purchasing : HUBCENTRIC 5x4.5 wheel spacers 1.25IN Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.5mm,advise torque specs at 75-85 Ft/Lbs
![Callahan 513115X2 [2] Pair FRONT Premium Grade [ 5 Lug ] Wheel Hub Bearing Assemblies [ SN95 ]](https://m.media-amazon.com/images/I/51ET1sNjcbL._SL75_.jpg)