Fitment:
2003-2010 - Infiniti - FX35
2003-2008 - Infiniti - FX45
2003-2008 - Infiniti - G35
2008-2010 - Infiniti - G37
1996-2001 - Infiniti - I30
2002-2004 - Infiniti - I35
1993-1997 - Infiniti - J30
1990-1992 - Infiniti - M30
2003-2010 - Infiniti - M45
1990-2006 - Infiniti - Q45
1995-1998 - Nissan - 240SX (Will NOT fit base models)
1987-1996 - Nissan - 300ZX
2003-2008 - Nissan - 350Z
2009-2014 - Nissan - 370Z
2002-2012 - Nissan - Altima
1995-2008 - Nissan - Maxima
2003-2007 - Nissan - Murano
2007-2010 - Nissan - Sentra SE-R Spec V
Package Including
2 Wheel Spacers + 10 Lug Nuts
- Compatibility List Included : The hubcentric Wheel Spacers 5x4.5 compatible with 1995-2008 for Maxima 2002-2012 for Altima
- Installation with Confidence : 5x4.5 Wheel Spacers HUB CENTRIC with Thickenss:1" or 25mm;Inner Diameter:66.2mm;Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Thread Pinch:12x1.25;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Excellent Driving Experience : 5X114.3 WHEEL SPACERS 1 inch provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
- Little Change Huge Difference : These 1 inch WHEEL SPACERS 5 LUG make your vehicle have a more aggressive stance by giving it a slightly wider stance. And you can enjoy off-roading! Because tire spacers give your car better grip, more acceleration and better handling. And through mounting tire spacers give you more flexibility, because they allow for large brake caliper installations or lift/lowering kits
- Check before You Purchasing : 5x4.5 to 5X4.5 SPACERS ,Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.25mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 66.2mm,advise torque specs at 70-80 Ft/Lbs
- Compatibility List Included : The hubcentric Wheel Spacers 5x4.5 compatible with 1995-2008 for Maxima 2002-2012 for Altima
- Installation with Confidence : 5x4.5 Wheel Spacers HUB CENTRIC with Thickenss:1" or 25mm;Inner Diameter:66.2mm;Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Thread Pinch:12x1.25;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Excellent Driving Experience : 5X114.3 WHEEL SPACERS 1 inch provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
- Little Change Huge Difference : These 1 inch WHEEL SPACERS 5 LUG make your vehicle have a more aggressive stance by giving it a slightly wider stance. And you can enjoy off-roading! Because tire spacers give your car better grip, more acceleration and better handling. And through mounting tire spacers give you more flexibility, because they allow for large brake caliper installations or lift/lowering kits
- Check before You Purchasing : 5x4.5 to 5X4.5 SPACERS ,Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.25mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 66.2mm,advise torque specs at 70-80 Ft/Lbs
