fit for:
1995-1998 Nissan 240SX
1987-1996 Nissan 300ZX
2003-2009 Nissan 350Z
2009-2013 Nissan 370Z
2010-2013 Nissan Altima
2008-2012 Infiniti EX35
2013 Infiniti EX37/FX37
2003-2008 Infiniti FX45
2012-2013 Infiniti G25
2003-2008 Infiniti G35
2008-2013 Infiniti G37
2009-2013 Nissan GT-R
2011-2013 Nissan Juke
2006-2010 Infiniti M35
2011-2013 Infiniti M37
2003-2010 Infiniti M45
1995-2013 Nissan Maxima
2008-2013 Nissan Rogue
2010-2012 Nissan Sentra
IMPORTANT NOTES :
- Your vehicle may have different thread pitch wheel studs than what's supplied with these wheel spacers. This means you would need to purchase different lug nuts for proper installation.
- Installation should only be performed by a trained professional.
- Make sure you get 6-8 FULL TURNS of the lug nuts before tightening.
- Failure to follow proper procedures may cause your lug nuts to come undone while driving!!!
-Your OEM/Factory wheel studs may extend past the surface of the spacer, if this is the case, you have 3 options...
1) Your wheels need to have cavities on the back between the mounting holes
2) The OEM/Factory studs will need to be shortened
3) You can purchase shorter studs and install them on your hub
- No returns or exchange once installed
- Please be sure to take the proper measurements before making your purchase. The Buyer is responsible for making sure that they choose the correct thickness so as to not cause the wheel/tire to rub against the fender of the vehicle. Copy the following link to your address bar - //d3d71ba2asa5oz.cloudfront.net/12001428/images/measure_spacer.jpg
- Installation with Confidence : 5x114.3mm to 5x114.3mm Wheel Spacers Fit for for Nissan Sentra 2007-2022|| for Nissan 350Z 2003-2009|| for Nissan 370Z 2009-2021|| for Nissan Altima 2002-2022|| for Infiniti G25 2011-2012|| for Infiniti G37 2008-2013|| for Infiniti I35 2002-2004||
- Installation with Confidence : 5x114.3 Wheel Spacers 15mm with Thickness 15mm,Vehicle Bolt Pattern 5x4.5 or 5x114.3mm ,Wheel Bolt Pattern 5x4.5 or 5x114.3mm,Thread 12mmx1.25,Bore size 66.1mm.(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Superior Safety And Stability : Hubcentric wheel spacers 5x4.5 WHEEL SPACERS 15mm - support and center the wheel to better resist impact loads from different road conditions and eliminate the r-isk of vibration.Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub,ensuring precise wheel fitment while el-iminating risks from vibration
- Strict Quality Performance : 5x114.3 WHEEL SPACERS HUBCENTRIC are CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- Check before You Purchasing : 5x4.5 to 5x4.5 HUBCENTRIC WHEEL SPACERS Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.25mm threads; 2) You have more than 15mm of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 15mm (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 66.1mm,advise torque specs at 70-80 Ft/Lbs
- Installation with Confidence : 5x114.3mm to 5x114.3mm Wheel Spacers Fit for for Nissan Sentra 2007-2022|| for Nissan 350Z 2003-2009|| for Nissan 370Z 2009-2021|| for Nissan Altima 2002-2022|| for Infiniti G25 2011-2012|| for Infiniti G37 2008-2013|| for Infiniti I35 2002-2004||
- Installation with Confidence : 5x114.3 Wheel Spacers 15mm with Thickness 15mm,Vehicle Bolt Pattern 5x4.5 or 5x114.3mm ,Wheel Bolt Pattern 5x4.5 or 5x114.3mm,Thread 12mmx1.25,Bore size 66.1mm.(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- Superior Safety And Stability : Hubcentric wheel spacers 5x4.5 WHEEL SPACERS 15mm - support and center the wheel to better resist impact loads from different road conditions and eliminate the r-isk of vibration.Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub,ensuring precise wheel fitment while el-iminating risks from vibration
- Strict Quality Performance : 5x114.3 WHEEL SPACERS HUBCENTRIC are CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- Check before You Purchasing : 5x4.5 to 5x4.5 HUBCENTRIC WHEEL SPACERS Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.25mm threads; 2) You have more than 15mm of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 15mm (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 66.1mm,advise torque specs at 70-80 Ft/Lbs
