THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
1967-2014 Ford Mustang
2007-2014 Ford Edge
2003-2004 Ford Mach 1
1991-2011 Ford Crown Victoria
1982-1990 Ford Bronco (Does not fit XLT Model)
1981-2011 Ford Ranger
1991-2015 Ford Explorer
ADDITIONAL INFORMATION
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
