Item Specifications:
Quantity: Two (2)
Thickness: 1.0" (25mm)
Bolt Pattern: 5x4.5" (5x114.3)
Centerbore: 70.5mm
Stud/Nut Thread Pitch: 1/2"x20
Material: T6 Aerospace Grade Aluminum
Applications:
1967-1973, 1994-2014 Ford Mustang
2007-2011 Ford Edge
2003-2004 Ford Mach 1
1991-2007 Ford Crown Victoria
1982-1990 Ford Bronco (Doesn't fit XLT Model)
1981-2011 Ford Ranger
1991-2010 Ford Explorer
1984-1992 Lincoln Mark 7
1982-2004 Lincoln Town Car
2003-2010 Lincoln Aviator
1996-2010 Mercury Mountaineer
1991-1994 Mazda Navajo
1998-2001 Mazda B2500
1994-2007 Mazda B3000 and B4000
IMPORTANT - Must check before purchasing
- These spacers do not come with a lip, as you see in the pictures. If your wheels are not lugcentric, you may experience steering wheel vibrations while driving
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 1.0" (25mm). If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 1.0" (25mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find the correct item.
- No Returns or Exchanges once installed.
Contact Us
Our experienced and knowledgeable staff are here to help with any questions or problems you may have. Simply copy and paste the following link to your browser:
https://www.amazon.com/ss/help/contact/?_encoding=UTF8&ref_=v_sp_contact_seller&sellerID=A23ID4AZTDBV78
- StanceMagic Hubcentric Wheel Spacers without a Lip for 5/114.3 (5/4.5") Bolt Pattern Vehicles and 5/114.3 (5/4.5") Wheels. Buyers also need to verify: 1) Vehicle Hub Centerbore is 70.5mm; 2) Wheel studs are 1/2"-20 1/2x20 1/2"x20 threads; 3) You have 1.0" (25mm) of space between your fender and your wheel/tire; 4) Your factory wheel studs are shorter than 1.0" (25mm). NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit.
- [FITMENT] Compatible with Ford 1994-2014 Mustang, 2007-2010 Edge, 1992-2011 Crown Victoria, 1983-2012 Ranger, 1990-2010 Explorer, 2001-2010 Explorer Sport Trac. Compatible with Lincoln 1984-1992 Mark 7, 1981-2011 Town Car, 2003-2005 Aviator. Compatible with Mazda 1991-1994 Navajo, 1998-2001 B2500, 1994-2008 B3000, 1994-2010 B4000. And compatible with Mercury 1997-2010 Mountaineer. May fit other vehicles, verify with spacer specifications.
- [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 70.5mm | Stud/Nut Thread Pitch: 1/2-20 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. Precise machined stud/nut threads prevents cross threading.
- [PRODUCT BENEFITS] Hubcentric Spacer Bore fits perfectly around 70.5mm vehicle hubs to prevent wobble or vibrations, thereby eliminating the need to purchase hubcentric rings. Since the spacers do not come with a lip, it allows you to use any bore wheel. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well clearance to allow installation of wider rims/tires. Gives your vehicle a more aggressive stance.
- [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it's your first time installing auto parts. IMPORTANT SAFETY ADVISORY: Torque lug nuts to manufacturer specifications. Check and re-torque all hardware, including lug nuts securing adapter to wheel hub after 25-50 miles. See Description for additional install information.
- StanceMagic Hubcentric Wheel Spacers without a Lip for 5/114.3 (5/4.5") Bolt Pattern Vehicles and 5/114.3 (5/4.5") Wheels. Buyers also need to verify: 1) Vehicle Hub Centerbore is 70.5mm; 2) Wheel studs are 1/2"-20 1/2x20 1/2"x20 threads; 3) You have 1.0" (25mm) of space between your fender and your wheel/tire; 4) Your factory wheel studs are shorter than 1.0" (25mm). NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit.
- [FITMENT] Compatible with Ford 1994-2014 Mustang, 2007-2010 Edge, 1992-2011 Crown Victoria, 1983-2012 Ranger, 1990-2010 Explorer, 2001-2010 Explorer Sport Trac. Compatible with Lincoln 1984-1992 Mark 7, 1981-2011 Town Car, 2003-2005 Aviator. Compatible with Mazda 1991-1994 Navajo, 1998-2001 B2500, 1994-2008 B3000, 1994-2010 B4000. And compatible with Mercury 1997-2010 Mountaineer. May fit other vehicles, verify with spacer specifications.
- [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 70.5mm | Stud/Nut Thread Pitch: 1/2-20 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. Precise machined stud/nut threads prevents cross threading.
- [PRODUCT BENEFITS] Hubcentric Spacer Bore fits perfectly around 70.5mm vehicle hubs to prevent wobble or vibrations, thereby eliminating the need to purchase hubcentric rings. Since the spacers do not come with a lip, it allows you to use any bore wheel. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well clearance to allow installation of wider rims/tires. Gives your vehicle a more aggressive stance.
- [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it's your first time installing auto parts. IMPORTANT SAFETY ADVISORY: Torque lug nuts to manufacturer specifications. Check and re-torque all hardware, including lug nuts securing adapter to wheel hub after 25-50 miles. See Description for additional install information.
