Application:
1994-2001 - Dodge - Ram 1500 (4WD Only)
2006-2010 - Dodge - Ram 1500 (4WD MegaCab Only)
1994-2013 - Dodge - Ram 2500 (4WD Only)
1994-2013 - Dodge - Ram 3500 (4WD Only)
*** NOTE: May need longer aftermarket shocks or shock extenders
Important Notes:
- Be aware that the 3" (3.0 inch) Lift Height in the "Product Details" section above is the amount your vehicle will be lifted. This may not be the actual thickness of the Lift Spacer you will be receiving. This is because your suspension geometry may not be 1:1 ratio.
- If you have questions about the Item Thickness, please send us a message.
- The Lift Height we specified above is only applicable if you have not added / changed other suspension components.
- Installation should only be performed by a trained professional.
- An alignment is necessary after the installation of this item to achieve the full lift height.
- No Returns or Exchanges once installed.
- [FITMENT] ONLY fits four wheel drive 4WD Trucks. Does NOT fit 2WD RWD. Compatible with Dodge 1994-2001 Ram 1500 4WD Series, 1994-2013 Ram 2500 4WD, 1994-2013 Ram 3500 4-WD. *** May need longer aftermarket shocks or shock extenders ***
- [SPECIFICATIONS] Provides a True 3" (3.0 inch) Lift. Includes 2 Black Coil Spring Lift Spacers (manufactured from 1/4" steel pieces) that installs on top of your springs. Also includes 6x studs (Grade 10.9) and 6x mounting nuts (Grade 8).
- [PRODUCT BENEFITS] Allows you to avoid the expense of a complete suspension upgrade while still improving the aesthetics. Increases ground clearance. Improves the look of your truck. Can fix sag or improper rake from adding a heavy bumper, a camper, an RV, or other aftermarket accessories. Allows you to accommodate taller tires and larger wheels / rims. Designed to not bend or warp under stress. Should last the lifetime of your vehicle.
- [MATERIAL & MANUFACTURING] The lift spacers are made from 1/4" thick heat treated hardened steel. Machined to exact specifications and precisely welded to ensure optimal quality, durability, & fitment. Coating on the steel prevents surface corrosion and rust. The studs are made of heat treated Metric Grade 10.9 steel and the nuts are Metric Grade 8 steel. Precise machined stud/nut threads prevents cross threading.
- [INSTALLATION] This suspension self leveling unit does not come with instructions but is completely bolt-on. Please consult a professional if you need support. Should take 2-4 hours to install. Make sure nuts are torqued to 32 ft/lbs. The use of loctite is recommended to protect the threads from rust / corrosion and prevent loosening from vibrations. After install your suspension will be slightly stiffer. An alignment after installation is needed to get the correct lift height.
- [FITMENT] ONLY fits four wheel drive 4WD Trucks. Does NOT fit 2WD RWD. Compatible with Dodge 1994-2001 Ram 1500 4WD Series, 1994-2013 Ram 2500 4WD, 1994-2013 Ram 3500 4-WD. *** May need longer aftermarket shocks or shock extenders ***
- [SPECIFICATIONS] Provides a True 3" (3.0 inch) Lift. Includes 2 Black Coil Spring Lift Spacers (manufactured from 1/4" steel pieces) that installs on top of your springs. Also includes 6x studs (Grade 10.9) and 6x mounting nuts (Grade 8).
- [PRODUCT BENEFITS] Allows you to avoid the expense of a complete suspension upgrade while still improving the aesthetics. Increases ground clearance. Improves the look of your truck. Can fix sag or improper rake from adding a heavy bumper, a camper, an RV, or other aftermarket accessories. Allows you to accommodate taller tires and larger wheels / rims. Designed to not bend or warp under stress. Should last the lifetime of your vehicle.
- [MATERIAL & MANUFACTURING] The lift spacers are made from 1/4" thick heat treated hardened steel. Machined to exact specifications and precisely welded to ensure optimal quality, durability, & fitment. Coating on the steel prevents surface corrosion and rust. The studs are made of heat treated Metric Grade 10.9 steel and the nuts are Metric Grade 8 steel. Precise machined stud/nut threads prevents cross threading.
- [INSTALLATION] This suspension self leveling unit does not come with instructions but is completely bolt-on. Please consult a professional if you need support. Should take 2-4 hours to install. Make sure nuts are torqued to 32 ft/lbs. The use of loctite is recommended to protect the threads from rust / corrosion and prevent loosening from vibrations. After install your suspension will be slightly stiffer. An alignment after installation is needed to get the correct lift height.
