Parameter
Model: WS2812B 144 pixels LED strip
light source: 5050 RGB LED
Led Qty: 144pcs per meter
Wave length(NM):R,650nm ; G,520nm ; B,460nm
IC Model: WS2811 IC built in 5050 SMD
The gray level: 256
View angle:120°
Color: full color (24-bit )
Voltage: DC 5V
Power: 0.3W per LED, 43.2W per meter
Waterproof: Not waterproof
FPCB board color: White
Dimension: 40*0.55*0.15inches/ 1000*12*3mm
Life span:≥50000hrs
Kindly note
1) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.
2) The LED strip comes with 3-pin JST SM connector on each end and separated power/ground wires, which makes it easy to wire up for power. These strips are sold by the meter!
3) With compatible controller, it can appear colorful curtain-up, flow water, raindrop, jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw, Flash, LedEdit software.
4) There is a joint point in the middle of the strip and the LEDs are not perfectly spaced at that point. It's just a tradeoff with the ability of the flex PCB maker and density. In fact, most if not all of the LED strips are manufactured in half-meter lengths.
Package:
1x 3.2ft 144 pixels WS2812B led strip (Power supply and controller are not included)
To let this LED strip work, you may need
5V 10A Power supply:
https://www.amazon.com/dp/B01M0KLECZ
SP105E Bluetooth Magic LED Controller:
https://www.amazon.com/dp/B01LW1J10W
SP103E Mini Wireless RF Remote Controller:
https://www.amazon.com/dp/B01HCHHM04
T1000S LED Controller:
https://www.amazon.com/dp/B01M4IX5FF
- Amazing color changes. The unbelievable 144 individually controllable LED pixels strip are even more fun and glowy-256 brightness display and full 24-bit color display. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel) and set them to any animation you want.
- Can be programmed with T1000S, K1000C etc. Support SP105E SP108E SP110E app controllers, SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers.
- Comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
- Easy installation and configuration. It comes with 3-pin JST-SM connectors on both ends. Each LED can be cut off without damaging the rest strip. So you can shorten, lengthen or bend it if you want.
- Wide application. It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs and so on.
- Amazing color changes. The unbelievable 144 individually controllable LED pixels strip are even more fun and glowy-256 brightness display and full 24-bit color display. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel) and set them to any animation you want.
- Can be programmed with T1000S, K1000C etc. Support SP105E SP108E SP110E app controllers, SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers.
- Comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
- Easy installation and configuration. It comes with 3-pin JST-SM connectors on both ends. Each LED can be cut off without damaging the rest strip. So you can shorten, lengthen or bend it if you want.
- Wide application. It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs and so on.