ALITOVE 100pcs WS2812B Addressable LED Pixel Light 5050 RGB SMD on Heat Sink PCB Board 1-led LED Module Pixels Light 5V DC Compatible with Arduino, Raspberry Pi;
ALITOVE 100pcs WS2812B Addressable LED Pixel Light 5050 RGB SMD on Heat Sink PCB Board 1-led LED Module Pixels Light 5V DC Compatible with Arduino, Raspberry Pi

Parameter
Model: WS2812 pixel board
light source: SMD 5050 RGB
plate: aluminum plate
IC Model: WS2812B
the gray level: 256
Beam angle: 120 °
Color: full color, can be adjusted by the con...

Buy Now From Amazon

Parameter
Model: WS2812 pixel board
light source: SMD 5050 RGB
plate: aluminum plate
IC Model: WS2812B
the gray level: 256
Beam angle: 120 °
Color: full color, can be adjusted by the controller as follows: white, red, yellow, blue, green, etc.
The standard operating voltage: DC 5V
Power: 0.3W ± 0.01%
Waterproof: not waterproof
FPCB board size: Width: 10 mm, thickness: 3mm
FPCB board color: white

Kindly note
None of the LEDS are connected through the PCB. So you need to solder them based on your requirement. There are 6 solder points on the back of LEDs.
Arduino is not included.

Package:
100pcs WS2812B LED mounted on white PCB Board

Related product links

5V 10A Power supply:
https://www.amazon.com/dp/B01M0KLECZ

SP105E Bluetooth Magic LED Controller:
https://www.amazon.com/dp/B01LW1J10W

SP103E Mini Wireless RF Remote Controller:
https://www.amazon.com/dp/B01HCHHM04

T1000S LED Controller:
https://www.amazon.com/dp/B01M4IX5FF

WS2813 154 pixels addressable LED Strip:
https://www.amazon.com/dp/B01IR5L670

WS2811 LED pixels string:
https://www.amazon.com/dp/B01AG923GI



  • Fully addressable (each LED can have it's own color and brightness), 256 brightness display and full 24-bit color display
  • It can also be controlled by SP105E SP108E SP110E pre-programmed app controllers and SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers.
  • Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers. because the addressable IC is built-in the 5050SMD and it makes this led module to light up individually at your wish
  • These 5050 RGB LED Module Pixels are digitally-controllable lights you can set to any color, or animate. The color of the light were highly consistent, cost-effective
  • Fully addressable (each LED can have it's own color and brightness), 256 brightness display and full 24-bit color display
  • It can also be controlled by SP105E SP108E SP110E pre-programmed app controllers and SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers.
  • Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers. because the addressable IC is built-in the 5050SMD and it makes this led module to light up individually at your wish
  • These 5050 RGB LED Module Pixels are digitally-controllable lights you can set to any color, or animate. The color of the light were highly consistent, cost-effective

Similar Products

HKBAYI 50Pair / 50sets 3 pin JST SM Male Female plug LED Connector Cable For WS2812B WS2812 WS2811 LED Strip Lamp with 15cm Long WireELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)Arducam PRO Mini Atmega328 Development Board 5V/16MHz 328 Compatible with ArduinoALITOVE WS2811 12mm Diffused Digital RGB LED Pixel Light Individually Addressable Round LED Pixels Module IP68 Waterproof DC 5V 50pcs/setAdafruit FadeCandy - Dithering USB-Controlled Driver for NeoPixelsALITOVE 16.4ft WS2812B Individually Addressable LED Strip Light 5050 RGB SMD 150 Pixels Dream Color Waterproof IP67 Black PCB 5V DCMagiDeal 10pcs Female MICRO USB to DIP 5-Pin Pinboard 2.54mm micro USB typeAdafruit NeoPixel Jewel - 7 x WS2812 5050 RGB LED with Integrated Drivers [ADA2226] (Original Version)