Product Specifications:
Nut Height: 1.40 inches
Hex Size: 19mm or 3/4"
Thread Pitch: 1/2"x20 RH
Compatible With:
Can fit on 4-Lug and 5-Lug Vehicles that use 1/2" Thread Pitch studs
Ford
1994-2014 Mustang
1992-2011 Crown Victoria
1977-1988 Thunderbird
1998-2017 Falcon
1985-1997 Aerostar
1992-1996 Bronco
1984-1990 Bronco II
1992-2014 E-150 Econoline
1990-2019 Explorer
2001-2010 Explorer Sport Trac
1992-1996 F-150
1965-1979 Ranchero
1982-2002 Ranger
Dodge
1957-1976 Coronet
1965-1992 Dodge Monaco
1987-1990 Dakota
2007-2012 Nitro
1975-1985 Ramcharger
1996-2003 Ram 3500 Van
Lincoln
1984-1992 Mark VII
1982-2011 Town Car
*** IMPORTANT: Check before purchasing ***
- Your vehicle must have 1/2"x20 RH threaded studs.
- Your wheels' lug holes must have conical / 60 degree cone / taper / acorn seat.
- Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.
- Check vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 30mm (a little less than 1.25"), these will not work for you.
- 20-piece package of Closed Bulge aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 1/2"x20 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
- Compatible with Ford 1992-2011 Crown Victoria, 1977-1988 Thunderbird, 1964-2014 Mustang. Compatible with Ford 1992-1996 Bronco, 1984-1990 Bronco II. Compatible with Ford 1992-2006 E-150 Econoline, 1991-2019 Explorer, 2001-2010 Explorer Sport Trac. Compatible with Ford F-150 (1992-1996), 1960-1979 Ranchero, 1983-2012 Ranger. Compatible with Dodge 1965-1977 Monaco, 1987-1990 Dakota, 2007-2012 Nitro, 1994-2001 Ram 1500. NOTE: Vehicle Must Have 1/2"-20 1/2x20 1/2"x20 Studs.
- Total Length: 1.40 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4") | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements.
- [Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size (length & width) before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 19mm (3/4") Hex Socket Key Tool.
- These 1/2-20 lug nuts are not an oem or genuine OE part, but are compatible with various Ford, Dodge, Lincoln 5Lug vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings.
- 20-piece package of Closed Bulge aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 1/2"x20 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
- Compatible with Ford 1992-2011 Crown Victoria, 1977-1988 Thunderbird, 1964-2014 Mustang. Compatible with Ford 1992-1996 Bronco, 1984-1990 Bronco II. Compatible with Ford 1992-2006 E-150 Econoline, 1991-2019 Explorer, 2001-2010 Explorer Sport Trac. Compatible with Ford F-150 (1992-1996), 1960-1979 Ranchero, 1983-2012 Ranger. Compatible with Dodge 1965-1977 Monaco, 1987-1990 Dakota, 2007-2012 Nitro, 1994-2001 Ram 1500. NOTE: Vehicle Must Have 1/2"-20 1/2x20 1/2"x20 Studs.
- Total Length: 1.40 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4") | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements.
- [Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size (length & width) before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 19mm (3/4") Hex Socket Key Tool.
- These 1/2-20 lug nuts are not an oem or genuine OE part, but are compatible with various Ford, Dodge, Lincoln 5Lug vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings.
