Product Specifications:
Nut Height: 1.40 inches
Hex Size: 19mm or 3/4"
Thread Pitch: 12x1.5
Compatible With:
Can fit on 6-Lug Vehicles that use 12x1.5 Thread Pitch studs - Chevrolet, Honda, Isuzu, Mazda, Mitsubishi, Toyota, + More!
*** IMPORTANT: Check before purchasing ***
- Your vehicle must have 12x1.5 threaded studs.
- Your wheels' lug holes must have conical / 60 degree cone / taper / acorn seat.
- Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.
- Check vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 30mm (a little less than 1.25"), these will not work for you.
- 24-piece package of Closed Bulge aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 12x1.5 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
- Compatible with Toyota 89+ 4Runner, FJ Cruiser, Land Cruiser, 01-07 Sequoia, 93-98 T100, Tacoma 6-Lug, 00-06 Tundra. Compatible with Lexus 10-20 GX460, 2003-2009 GX470. Compatible with Mitsubishi 08-19 L200, 95-06 Montero, 97-19 Montero Sport. Compatible with Chevrolet 04-14 Colorado, 03-06 SSR, 02-09 TrailBlazer. Compatible with GMC 04-12 Canyon, 02-09 Envoy. Vehicle Must Have M12x1.5 12x1.5mm Studs.
- Total Length: 1.40 inches | Thread Size & Pitch: 12x1.5 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4") | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements.
- [Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size (length & width) before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 19mm (3/4") Hex Socket Key Tool.
- These Metric 12x1.5 lug nuts are not an oem or genuine OE part, but are compatible with various Toyota, Lexus, Mitsubishi, Cadillac, Chevrolet, Ford, GMC, Hummer, Hyundai, Isuzu, Kia, Mazda, Oldsmobile, Saab 6Lug vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings.
- 24-piece package of Closed Bulge aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 12x1.5 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
- Compatible with Toyota 89+ 4Runner, FJ Cruiser, Land Cruiser, 01-07 Sequoia, 93-98 T100, Tacoma 6-Lug, 00-06 Tundra. Compatible with Lexus 10-20 GX460, 2003-2009 GX470. Compatible with Mitsubishi 08-19 L200, 95-06 Montero, 97-19 Montero Sport. Compatible with Chevrolet 04-14 Colorado, 03-06 SSR, 02-09 TrailBlazer. Compatible with GMC 04-12 Canyon, 02-09 Envoy. Vehicle Must Have M12x1.5 12x1.5mm Studs.
- Total Length: 1.40 inches | Thread Size & Pitch: 12x1.5 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4") | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements.
- [Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size (length & width) before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 19mm (3/4") Hex Socket Key Tool.
- These Metric 12x1.5 lug nuts are not an oem or genuine OE part, but are compatible with various Toyota, Lexus, Mitsubishi, Cadillac, Chevrolet, Ford, GMC, Hummer, Hyundai, Isuzu, Kia, Mazda, Oldsmobile, Saab 6Lug vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings.
