Beagleboard (BeagleBone Rev C);

Getting Started with BeagleBone & BeagleBone Black

Beagle boards are tiny computers with all the capability of today's desktop machines, without the bulk, expense, or noise. Read the step-by-step getting started tutorial below to begin developing with your BeagleBone or BeagleBone Black in minutes
The BeagleBone Black is the low-cost, high-expansion, maker-focused, bare-bones BeagleBoard, small enough to fit in an Altoids tin. Built on a high-performance TI ARM processor, the BBONE-BLACK-4G has all the capabilities of the original Beaglebone plus additional features like HDMI output. The Element 14 BeagleBone Black brings full-featured Linux to places it has never gone before.

Revision C offers expanded eMMC memory to 4GB and Debian Linux instead of the original Angstrom distribution

Beaglebone Black Kernel Update

It is always recommended that production boards be updated to the latest image upon receipt. The Beaglebone Black board recommends the eMMC to be flashed with the latest image for the best user experience.

Specifications
•Processor ◦1GHz ARM Cortex-A8 (AM335x)
â—¦3D graphics accelerator
â—¦NEON floating-point accelerator
â—¦2x PRU 32-bit microcontrollers
•Connectivity
â—¦USB client: power, debug and device
â—¦USB host
â—¦Ethernet
â—¦Micro-SD
â—¦Micro HDMI output
â—¦2x 46 pin headers- 2x I2C, 5x UART, I2S, SPI, CAN, 66x 3.3V GPIO, 7x ADC

•Software
â—¦4Gb Embedded MMC Flash with Debian Distribution
Board
â—¦size: 3.4" x 2.1"

In the box
(1)BeagleBone Black board,
(1)USB cable
(1)card that should be read.