USB to TTL Serial Cable
Moyina USB-to-TTL (Serial) Cable 3.3V is a USB to Serial (TTL level) converter which allows the user to connect directly to a microcontroller UART or I/O pins
Operating system support
Drivers are available to download as follow:
https://www.ftdichip.com/Drivers/VCP.htm
which allow FTDI devices to work with the following operating systems:
Windows 10 32,64-bit
Windows 8/8.1 32,64-bit
Windows 7 32,64-bit
Windows Vista and Vista 64-bit
Windows XP and XP 64-bit
Windows 98, 98SE, ME, 2000, Server 2003, XP, Server 2008 and server 2012 R2
Windows XP Embedded
Windows CE 4.2, 5.0 and 6.0
Mac OS 8/9, OS-X
Linux 2.4 and greater
Android (J2xx)
Installation Guides
If you need further support about how to pick up and install drivers, please goes to https://www.ftdichip.com/Support/Documents/InstallGuides.htm
Guarantee: if you have any questions or Suggestions in the process of use, please feel free to contact us, we will solve within 24 hours
- Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB to serial UART interface IC device which handles all the USB signalling and protocols
- Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5; Support FTDI VCP driver and D2XX driver
- Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved
- Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in 'Product description' by scrolling down this page
- The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold plated connector. The length of the cable is 6ft(1.8m) and UL ‘E326510’ certified
- Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB to serial UART interface IC device which handles all the USB signalling and protocols
- Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5; Support FTDI VCP driver and D2XX driver
- Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved
- Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in 'Product description' by scrolling down this page
- The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold plated connector. The length of the cable is 6ft(1.8m) and UL ‘E326510’ certified
