Looking for a space-saving solution in your kitchen? Convert your Panasonic 1. 6 cu ft. countertop microwave oven to a built-in model with the Panasonic NN-TK722SS 27” microwave trim kit. This Trim Kit consists of the ...

Buy Now From Amazon

Looking for a space-saving solution in your kitchen? Convert your Panasonic 1. 6 cu ft. countertop microwave oven to a built-in model with the Panasonic NN-TK722SS 27” microwave trim kit. This Trim Kit consists of the trim frame, an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out opening to give your kitchen a stylish look while freeing up precious countertop space. The Panasonic NN-TK722SS Trim Kit is designed for use only with the NN-SE7**S | NN-SD7**S | NN-SN7**S | NN-ST7**S Panasonic Microwave Ovens. For safety, unplug the microwave oven before attempting installation of the NN-TK722SS trim kit. Installation of this trim kit requires basic mechanical and electrical skills and may be completed by the DIY homeowner or kitchen cabinetry professional. Proper installation is the responsibility of the installer. The microwave oven must be used with a properly grounded 3-prong receptacle in compliance with the National Electrical code, as well as any applicable local regulations. Also refer to the microwave oven operating instructions for other safety and electrical requirements.

  • Stainless Steel 27” Microwave Trim Kit compatible with 1.6 cu ft Panasonic Microwave Oven models including NN-SE7**S, NN-SD7**S, NN-SN7**S
  • Trim Kit Outer Size - 684mm or 27” (W) x 419mm or 16-1/2” (H) x 20mm or ¾” (D)
  • Trim Kit Inner Size - 22 5/8" (W) x 11 3/8" (H)
  • Required Cabinet Opening - 648mm or 25-1/2” +8mm or 5/16” – 0mm(W) x 389mm or 15-5/16” +/- 2mm or 5/64” (H) x minimum 533mm or 21" (D) and minimum 920mm or 36-1/4” from the floor
  • Tools Needed for Installation - Measuring tape, pencil, Phillips screwdriver, Ø 2 (5 /64") mm drill. Use only with the NN-SE7**S | NN-SD7**S | NN-SN7**S | NN-ST7**S Panasonic Microwave Ovens.
  • Stainless Steel 27” Microwave Trim Kit compatible with 1.6 cu ft Panasonic Microwave Oven models including NN-SE7**S, NN-SD7**S, NN-SN7**S
  • Trim Kit Outer Size - 684mm or 27” (W) x 419mm or 16-1/2” (H) x 20mm or ¾” (D)
  • Trim Kit Inner Size - 22 5/8" (W) x 11 3/8" (H)
  • Required Cabinet Opening - 648mm or 25-1/2” +8mm or 5/16” – 0mm(W) x 389mm or 15-5/16” +/- 2mm or 5/64” (H) x minimum 533mm or 21" (D) and minimum 920mm or 36-1/4” from the floor
  • Tools Needed for Installation - Measuring tape, pencil, Phillips screwdriver, Ø 2 (5 /64") mm drill. Use only with the NN-SE7**S | NN-SD7**S | NN-SN7**S | NN-ST7**S Panasonic Microwave Ovens.

Similar Products

PANASONIC Compact Microwave Oven Built In / Countertop with Inverter Technology and 1250W of Cooking Power - NN-SD745S - 1.6 cu. Ft (Stainless Steel / Silver)Panasonic Microwave Oven NN-SN766S Stainless Steel Countertop/Built-In with Inverter Technology and Genius Sensor, 1.6 Cu. Ft, 1250WPanasonic Countertop / Built-In Microwave Oven with Cyclonic Wave Inverter Technology and 1250W of Cooking Power - NN-SD775S - 1.6 cu. ft (Stainless Steel / Silver)Panasonic NN-SD755S / NN-SD765S Cyclonic Wave Inverter Technology Microwave Oven, 1.6 cu. Ft, Stainless (Renewed)Panasonic 1.6 Cu. Ft. Built-In/Countertop Cyclonic Wave Microwave Oven w/Inverter Technology - Stainless SteelPanasonic NN-SN773SAZ Stainless 1.6 Cu. Ft. Countertop Built-In Microwave with Inverter Technology, Stainless Steel/SilverPanasonic 30” Microwave Trim Kit for Panasonic 1.6 cu ft Microwave Ovens – NN-TK732SS (Stainless Steel)Panasonic NN-TK922SS 27 TRIM KIT, 27 inch, Stainless