Looking for a space-saving solution in your kitchen? Convert your Panasonic 2. 2 cu ft. countertop microwave oven to a built-in model with the Panasonic NN-TK922SS 27€ microwave trim kit. This Trim Kit consists of ...

Buy Now From Amazon

Looking for a space-saving solution in your kitchen? Convert your Panasonic 2. 2 cu ft. countertop microwave oven to a built-in model with the Panasonic NN-TK922SS 27€ microwave trim kit. This Trim Kit consists of the trim frame, an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out opening to give your kitchen a stylish look while freeing up precious countertop space. The Panasonic NN-TK922SS Trim Kit is designed for use only with the NN-SE9**S | NN-SD9**S | NN-SN9**S | NN-ST9**S Panasonic Microwave Ovens. For safety, unplug the microwave oven before attempting installation of the NN-TK922SS trim kit. Installation of this trim kit requires basic mechanical and electrical skills and may be completed by the DIY homeowner or kitchen cabinetry professional. Proper installation is the responsibility of the installer. The microwave oven must be used with a properly grounded 3-prong receptacle in compliance with the National Electrical code, as well as any applicable local regulations. Also refer to the microwave oven operating instructions for other safety and electrical requirements.

  • Stainless Steel 27” Microwave Trim Kit compatible with 2.2 cu. ft. Panasonic Microwave Oven models including NN-SE9**S, NN-SD9**S, NN-SN9**S
  • Trim Kit Outer Size - 684mm or 27” (W) x 472mm or 18-9/16” (H) x 20mm or ¾” (D)
  • Trim Kit Inner Size – 24-5/8" (W) x 13-7/16" (H)
  • Required Cabinet Opening - 648mm or 25-1/2" + 8mm or 5/16” – 0mm (W) x 442mm or 17-3/8" +/- 2mm or 5/64” (H) x minimum 533mm or 21" (D) and minimum 920mm or 36-1/4” from the floor
  • Tools Needed for Installation - Measuring tape, pencil, Phillips screwdriver, Ø 2 (5 /64") mm drill
  • Stainless Steel 27” Microwave Trim Kit compatible with 2.2 cu. ft. Panasonic Microwave Oven models including NN-SE9**S, NN-SD9**S, NN-SN9**S
  • Trim Kit Outer Size - 684mm or 27” (W) x 472mm or 18-9/16” (H) x 20mm or ¾” (D)
  • Trim Kit Inner Size – 24-5/8" (W) x 13-7/16" (H)
  • Required Cabinet Opening - 648mm or 25-1/2" + 8mm or 5/16” – 0mm (W) x 442mm or 17-3/8" +/- 2mm or 5/64” (H) x minimum 533mm or 21" (D) and minimum 920mm or 36-1/4” from the floor
  • Tools Needed for Installation - Measuring tape, pencil, Phillips screwdriver, Ø 2 (5 /64") mm drill

Similar Products

Panasonic Microwave Oven NN-SD945S Stainless Steel Countertop/Built-In with Inverter Technology and Genius Sensor, 2.2 Cu. Ft, 1250WPanasonic Countertop / Built-In Microwave Oven with Cyclonic Wave Inverter Technology and 1250W of Cooking Power - NN-SD975S - 2.2 cu. ft (Stainless Steel / Silver)Panasonic Microwave Oven, Stainless Steel Countertop/Built-In Cyclonic Wave with Inverter Technology and Genius Sensor, 2.2 Cu. Ft, 1250W, NN-SN97JS (Silver)Shower System, Wall Mounted Shower Faucet Set for Bathroom with High Pressure 8Panasonic Microwave Oven NN-SN936B Black Countertop with Inverter Technology and Genius Sensor, 2.2 Cu. Ft, 1250WIMLEZON Pot Filler Faucet Stainless Steel Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two HandlesAvallon ABR241SGRH 140 Can 24Maxmoral 5-Pack 4-Port Wall Plate Keystone Jack with Screw - White