The Shoreline Marine Automatic 800 GPH 12 Volt Bilge Pump is a complete self-contained system providing peace of mind that your bilge will be pumped out automatically. The compact automatic design is fully submersible and easy to install making this a great choice as a replacement pump or when to add a second bilge pump to your boat. The mounting bracket makes installation easy regardless of your application. Like all Shoreline Marine products this automatic bilge pump is designed to stand up to a harsh marine environment. The impeller shaft is stainless steel, the wires are tinned marine grade, the housing is sealed and it’s easy to inspect and keep clean and free of debris. The outlet hose barb is ¾†for use with a common ¾†bilge hose and through-hull fitting. It can be wired to an on/off switch for manual operation and then the automatic feature can be wired directly to the battery. Or, you can use an optional 3-way switch to provide manual/off/auto switching modes.
- The Shoreline Marine Automatic 800 GPH Bilge pump is a complete bilge pump with a self-contained automatic float switch built in to provide peace of mind that your pump will pump out the bilge water and turn it off when done
- The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump
- The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off
- The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH
- The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade
- The Shoreline Marine Automatic 800 GPH Bilge pump is a complete bilge pump with a self-contained automatic float switch built in to provide peace of mind that your pump will pump out the bilge water and turn it off when done
- The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump
- The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off
- The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH
- The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade
