Specifically designed for marine and automotive applications
Original patented design
UV resistant contoured plastic panel
3 position (Auto / Off / Manual) LED illuminated rocker switch with rubber se...

Buy Now From Amazon

Specifically designed for marine and automotive applications
Original patented design
UV resistant contoured plastic panel
3 position (Auto / Off / Manual) LED illuminated rocker switch with rubber seal
Used to control 12V submersible bilge pumps in conjunction with float switches
Green LED indicator lights up when switch is at the top "Auto" position
Red LED indicator lights up when switch is at the bottom "Manual" position
LED indicator lights are off when switch is at the centre "Off" position
No more having to change blown fuses! Switch is isolated by its own 'push-to-reset' 10 Amp circuit breaker with rubber boot
Nickel plated brass terminal connectors
Easy to install and use
Panel comes pre-wired, suits 12V systems
Includes 4 mounting screws and silicone gasket

Specifications
Input Voltage: 12V DC
LED colour: Green for "AUTO", Red for "MANUAL"
Circuit Breaker: 10 Amp, with rubber boot
Terminal material: Nickel plated brass
Rating: IP61
Dimensions: Height 100mm, Width 60mm
Cutout required: 83mm x 43mm


  • Specifically designed for marine and automotive applications
  • Controls any pump equipped with an automatic float switch. Toggle has three positions (Automatic, Off, or Manual) and has a "fail-safe" spring to return the switch to "off" from the "manual" position, so the pump can not accidentally be left on.
  • You needn’t replace the fuse, just press the breaker button to restore the circuit when occurs Short circuit. Press its own to reset 10 amp circuit breaker.
  • It only needs to connect the positive and negative wires, no need to install the fuses, and the panel itself has protection devices.
  • Water resistant to humidity and some rain.
  • Specifically designed for marine and automotive applications
  • Controls any pump equipped with an automatic float switch. Toggle has three positions (Automatic, Off, or Manual) and has a "fail-safe" spring to return the switch to "off" from the "manual" position, so the pump can not accidentally be left on.
  • You needn’t replace the fuse, just press the breaker button to restore the circuit when occurs Short circuit. Press its own to reset 10 amp circuit breaker.
  • It only needs to connect the positive and negative wires, no need to install the fuses, and the panel itself has protection devices.
  • Water resistant to humidity and some rain.

Similar Products

Shoreline Marine Plumbing Kit 3/4Seaflo Automatic Submersible Boat Bilge Water Pump 12v 750gph Auto with Float SwitchBlue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & CoverAmarine-made 12v 20 Amp Waterproof 2 Blue LED On-Off-On 2 Position Boat Marine DPDT 7 Pin Rocker Switch with 2 Blue Led LampsAncor Marine Grade Duplex CablesBlue Sea Systems 10 Gang Common 150A Busbar with CoverSeaflo SFBS-30-01 BOAT BILGE PUMP SWITCH (12V, 24V, 32V)Rule 35A Rule-A-Matic Bilge Pump Float Switch, Mercury Free