• Aftermarket Programming Cable
  • FTDI USB Chipset
  • TX and RX Led indicators
  • Total Length: 1M (3.3 feet)
  • No programming software included
  • For use with Yaesu: FT-3000M, FT-7100M, FT-...

    Buy Now From Amazon

  • Aftermarket Programming Cable
  • FTDI USB Chipset
  • TX and RX Led indicators
  • Total Length: 1M (3.3 feet)
  • No programming software included
  • For use with Yaesu: FT-3000M, FT-7100M, FT-7800E, FT-7800R, FT-7900E, FT-7900R, FT-8000H, FT-8000R, FT-8100H, FT-8100R, FT-8500, FT-8800E, FT-8800R, FT-8900E, FT-8900R.

    This device requires an FTDI USB VCP Driver. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.

    For free driver download and installation instructions. Please visit the FTDI website: http://www.ftdichip.com/Drivers/VCP.htm

    • Aftermarket Programming Cable
    • FTDI USB chipset
    • TX and RX Led indicators
    • Total Length: 1M (3.3 feet)
    • No programming software included
    • Aftermarket Programming Cable
    • FTDI USB chipset
    • TX and RX Led indicators
    • Total Length: 1M (3.3 feet)
    • No programming software included

    Similar Products

    Valley Enterprises Yaesu USB FTDI Radio Programming Cable FT-60, VX-1, VX-2, VX-5CablesOnline , 20ft RG8x Coax UHF (PL259) Male/Male 50 ohm Antenna Cable , R-U020BTECH PC03 FTDI Genuine USB Programming Cable for BTECH, BaoFeng, Kenwood, and AnyTone RadioAuthentic Genuine Nagoya NA-771 15.6-Inch Whip VHF/UHF (144/430Mhz) Antenna SMA-Female for BTECH and BaoFeng RadiosBrowning WSPBR1015 Enclosed Nmo 3/4 Hole MountRectangular External Communications Speaker for Ham Radio, CB & ScannersCar Floor Seat Bolt Mount for ICOM IC-703 IC-706 IC-706MKII IC-7000 IC-2800H IC-2700H Yaesu FT-7800 FT-7800R FT-7900 FT-8800R FT-8900R FT-857D Wouxun KG-UV920P KG-UV920R AnyTone AT5888UV Radio Head50ft Rg8x Coax UHF (Pl259) Male/male 50 Ohm Antenna Cable