Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut;
Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut

Providing state of the art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes pull chips up and away from the router, leaving a smooth bottom surf...

Buy Now From Amazon

Providing state of the art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes pull chips up and away from the router, leaving a smooth bottom surface.

  • TOOL SPECS: Solid carbide, upcut, flush trim spiral with 1/4" cutting diameter, 1/4" shank, 1" cutting length, and 3" overall length for use in routers with a 1/4" collet.
  • FLUSH TRIM: For precise, clean flush trim cuts in hardwoods, laminates, plywood, particle board, solid surfaces, and composites for smooth results.
  • UP CUT SPIRAL: The spiral helix gently slices through wood grain to ensure clean, crisp cuts while outperforming standard straight bits.
  • TEMPLATES: For following templates, duplicating shapes, and creating intricate designs, especially when using a router table with the template positioned above the workpiece.
  • DOUBLE BEARING: Features double bearings for enhanced stability and reduced strain on the bearings.
  • TOOL SPECS: Solid carbide, upcut, flush trim spiral with 1/4" cutting diameter, 1/4" shank, 1" cutting length, and 3" overall length for use in routers with a 1/4" collet.
  • FLUSH TRIM: For precise, clean flush trim cuts in hardwoods, laminates, plywood, particle board, solid surfaces, and composites for smooth results.
  • UP CUT SPIRAL: The spiral helix gently slices through wood grain to ensure clean, crisp cuts while outperforming standard straight bits.
  • TEMPLATES: For following templates, duplicating shapes, and creating intricate designs, especially when using a router table with the template positioned above the workpiece.
  • DOUBLE BEARING: Features double bearings for enhanced stability and reduced strain on the bearings.

Similar Products

Whiteside Router Bits RFTD2100 1/4-Inch Cutting Diameter and Spiral Flush Trim Bit with Down CutWhiteside Router Bits UDFT5152 Flush Trim Spiral Bit with Up/Down 1/2-Inch Cutting Diameter and 1-1/2-Inch Cutting LengthWhiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting LengthYonico 14121 1/4-Inch Up-Cut Flush Trim Solid Carbide Spiral Router Bit 1/4-Inch ShankWhiteside Router Bits RFT5125 1/2-Inch Diameter Spiral Flush Trim Up Cut with 1-1/4-Inch Cutting LengthYonico 14120 1/4-Inch Down-Cut Flush Trim Solid Carbide Spiral Router Bit 1/4-Inch ShankRFT5200 SOLID CARBIDE 2 FLUTE UP-CUT SPIRAL FLUSH TRIM ROUTER BIT 1/2 DIA X 2Whiteside Router Bits 1955 Multi Rabbet Set Carbide Tipped 1-3/8-Inch Large Diameter and 1/2-Inch Cutting Length