If you feel like your paddle shifters are boring or lacking, you'll want to give it a striking new look by trying out the sporty red aluminum paddle shifter extensions!
This page features the red CNC aluminum steering wheel paddle shifter extensions made to fit the following vehicles:
- 2013-2019 Lexus IS200t IS200 IS250 IS300 IS350 IS-F
- 2015-up Lexus RC200t RC300 RC350 RC-F
- 2015-up Lexus NX200t NX300 NX-F
Each package will include a pair of steering wheel paddle shifter extensions, each cut from CNC billet aluminum and finished with a matte red texture. The installation process is simple and requires no modifications; simply clean the backside of your paddle shifters and apply the aluminum paddle shifter extension trims over the factory paddles.
With these red aluminum steering wheel paddle shifter extensions, your steering wheel will look more pronounced, sporty, and will make shifting gears much easier!
- Compatible with Lexus 2013-up IS200t IS200 IS250 IS300 IS350 IS-F, 2015-up RC200t RC300 RC350 (Not for RC-F), 2015-2021 NX200t NX300, 2011-2017 CT200h
- Complete set of left/right paddle shift extension covers CNC machined using aircraft grade T6 billet aluminum
- Installation Tip: 1) Clean the back of the OEM paddle shifter with rubbing alcohol, and wait until it drys out without any dust or oil/wax residuals; 2) Ensure the double-sided tape is warm enough for better bonding (you can use a heat gun or hairdryer to warm it up if necessary); 3) Peel and precisely stick on along the edge, and apply adequate pressure for about 2 mins to let it fully bonds; 4) If there are locking screws provided, please DO use them to ensure a more secure fitting!
- Compatible with Lexus 2013-up IS200t IS200 IS250 IS300 IS350 IS-F, 2015-up RC200t RC300 RC350 (Not for RC-F), 2015-2021 NX200t NX300, 2011-2017 CT200h
- Complete set of left/right paddle shift extension covers CNC machined using aircraft grade T6 billet aluminum
- Installation Tip: 1) Clean the back of the OEM paddle shifter with rubbing alcohol, and wait until it drys out without any dust or oil/wax residuals; 2) Ensure the double-sided tape is warm enough for better bonding (you can use a heat gun or hairdryer to warm it up if necessary); 3) Peel and precisely stick on along the edge, and apply adequate pressure for about 2 mins to let it fully bonds; 4) If there are locking screws provided, please DO use them to ensure a more secure fitting!
