DIYREpair Screen Replacement for iPhone XR 6.1', 3D Touch Display Full Repair kit, Digitizer Assembly with Tools Set, Tempered Glass, Instruction;

Only for iPhone XR 6.1 inch, Not for X XS XSMAX .

The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor, so please swap them out from your old screen and install them.

Note:
1. Do not apply pressure to the corners of the LCD panel.
2. Make sure each screw is installed back to its original hole.
3. Be gentle and cautions to the flex cable connectors when installing.
4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
5. DO NOT over-bend or use excessive force to tear it.
6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, the screen will not turn on.

Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.
2. Restart your phone: Reset the phone by holding both Power and Home button together pressed for min 15 sec, after few mins, turn the phone on. Or reconnect your battery.

Package Include:
1 x LCD Assembly
1 x High Qulity Repair Tools Set
1 x Sim Card Pin
1 x Hardness Tempered Glass
1 x Non-Dust Cloth
1 x Detailed Repair Flowchart
1 x Waterproof Adhesive

If you have any questions, please don't hesitate to contact seller, we will try our best to solve the problem. So long as the products cannot work without non-human factors, we will change new for you always.

Your good comments and satisfaction is our greatest motivation. Thanks for your buying, your choice will be the most correct, don't worry. .