A 1" X 30" leather Honing strop, when used properly with our Made in USA Buffing Compound can leave an incredible mirror polish finish on your knife's edge along with razor sharpness. You can also do it in a fraction of the time compared to hand stropping. When stropping a knife with a Super Strop, remember to use light pressure and allow the belt to do the work. Move the knife at the same speed you would if you were sharpening with an abrasive belt. The 1X30 in. Super Strop works fast! Make just 2 passes, at a slightly lower angle, on both sides of the knife and check for the burr and test your sharpness. Depending on what grit progression you used, more stropping may be necessary.
- 1X30 Super Strop Leather Honing Stropping Belt is fantastic addition to sharpening with a Harbor Freight 1X30 Belt Sander. Not only can you use this Leather Strop as the last stage of sharpening, but you can also use it to maintain an edge in between sharpening.
- Sample of Premium Made in USA Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge.
- 1x30 Super Strop Leather Honing Belts are made slightly short and may require stretching to be installed. If you believe your belt is too small, Contact us today! We strive to provide the best customer service & support!!
- Sharpening with professional results has never been easier on a Harbor Freight 1x30 inch belt sander. Made from Premium Quality Leather and Fits Popular belt sanders the Harbor Freight, Wen, Rikon and nearly every other 1x30 sander. Even the Harbor Freight 1X30 Combination sander.
- Not only can you use this Leather Strop as the last stage of sharpening, but you can also use it to maintain an edge in between sharpening.
- 1X30 Super Strop Leather Honing Stropping Belt is fantastic addition to sharpening with a Harbor Freight 1X30 Belt Sander. Not only can you use this Leather Strop as the last stage of sharpening, but you can also use it to maintain an edge in between sharpening.
- Sample of Premium Made in USA Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge.
- 1x30 Super Strop Leather Honing Belts are made slightly short and may require stretching to be installed. If you believe your belt is too small, Contact us today! We strive to provide the best customer service & support!!
- Sharpening with professional results has never been easier on a Harbor Freight 1x30 inch belt sander. Made from Premium Quality Leather and Fits Popular belt sanders the Harbor Freight, Wen, Rikon and nearly every other 1x30 sander. Even the Harbor Freight 1X30 Combination sander.
- Not only can you use this Leather Strop as the last stage of sharpening, but you can also use it to maintain an edge in between sharpening.
