Clock movement mechanism battery operated DIY repair parts replacement with 2 pairs of short hands
Clock repair kit:
Simple design, easy to use, suitable for repairing, replacing or making a clock.
Good craftsmanship:
Good handwork material to make a clock by yourself.
Specifications:
Clock hands: 2 pairs
Material: plastic and aluminum
Power: 1.5 V AA 1 x battery (not included)
Size from the center of the hole to the tip:
Hour hand length: approx. 35 mm/ 1.4 inches and 53 mm/ 2.1 inches
Minute hand length: approx. 51 mm/ 2.0 inches and 69 mm/ 2.7 inches
Second hand length: approx. 49 mm/ 1.9 inches
Second caps: approx. 7 mm/ 0.28 inches
Package includes:
1 x Quartz clock movement
2 x Minute hand
2 x Hour hand
1 x Second hand
1 x Second cap
1 x Plastic washer
1 x Brass washer
1 x Brass nut
Note:
This product package does not contain batteries.
- Package and install: come with especially designed with blister cardboard box and instructions, convenient to carry; Kindly note: the hands back color are silver, front color as the picture show
- Movement size: total shaft length is approx. 15 mm/ 3/ 5 inch, thread length is approx. 6.7 mm/ 7/ 25 inch, jump second movement is suitable for 1 - 4 mm/ 1/ 24 - 4/ 25 inch thickness clock panel
- Hole center to the tip hand size: the hour hands are approx. 35 mm/ 1.4 inches and 53 mm/ 2.1 inches respectively, minute hands are approx. 51 mm/ 2.0 inches and 69 mm/ 2.7 inches, 1 second hand is approx. 49 mm/ 1.9 inches, 1 second cap is approx. 7 mm/ 0.28 inches
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself
- Warm notice: clock hands are made of aluminum, please do not install them with too much pressure or they will be bent
- Package and install: come with especially designed with blister cardboard box and instructions, convenient to carry; Kindly note: the hands back color are silver, front color as the picture show
- Movement size: total shaft length is approx. 15 mm/ 3/ 5 inch, thread length is approx. 6.7 mm/ 7/ 25 inch, jump second movement is suitable for 1 - 4 mm/ 1/ 24 - 4/ 25 inch thickness clock panel
- Hole center to the tip hand size: the hour hands are approx. 35 mm/ 1.4 inches and 53 mm/ 2.1 inches respectively, minute hands are approx. 51 mm/ 2.0 inches and 69 mm/ 2.7 inches, 1 second hand is approx. 49 mm/ 1.9 inches, 1 second cap is approx. 7 mm/ 0.28 inches
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself
- Warm notice: clock hands are made of aluminum, please do not install them with too much pressure or they will be bent
