Long shaft clock replacement movement quartz DIY wall clock movement mechanism with 2 pairs of hands
Clock repair kit:
Simple design, easy to use, suitable for repairing, replacing or making a clock.
Good craftsmanship:
Good handwork material to make a clock by yourself.
Specifications:
Clock hands: 2 pairs
Material: plastic and aluminum
Power: 1.5 V AA 1 x battery (not included)
Size from the center of the hole to the tip:
Hour hand length: approx. 133 mm/ 5.2 inch, 116 mm/ 4.6 inches
Minute hand length: approx. 175 mm/ 6.9 inch, 160 mm/ 6.3 inches
Second caps: approx. 7 mm/ 0.28 inch
Package includes:
1 x Quartz clock movement
2 x Minute hand
2 x Hour hand
2 x Second caps
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook
- Packaging Include: the package includes one movement, four brackets (note the different colors on the front - black, and back - silver), one rubber gasket, one washer, one hex screw, and two caps; All necessary components for a smooth setup
- Size from the Center of the Hole to the Tip: the hour hand is approx. 133 mm/5.2 inches and 116 mm/4.6 inches long, the minute hand is approx. 175 mm/6.9 inches and 160 mm/6.3 inches long; 2 second caps: 7 mm/0.28 inches; Suitable for a length of 16-18mm from the center point to the clock
- Clock Mechanism Size: total length of the shaft is approx. 23 mm/0.91 inches, thread length is approx 14.6 mm/0.57 inches; The diameter of the threaded shaft is 8mm/0.31 inches; The second jump movement is suitable for clock panel with a thickness of 9 to 13 mm (0.35 to 0.51 inches)
- Packaging and Installation: come with a specially designed blister cardboard box, easy to carry, when you install this clock movement kit, make sure that the hour and minute hand are parallel
- Easy to Install: the clock movement kits are easy to install, simple and elegant design, these replacement parts fit well with different styles of clock frame; And please check the size before buying Before purchasing, please verify dimensions by checking the diameter of your clock face and the size of the movement shaft for compatibility
- Packaging Include: the package includes one movement, four brackets (note the different colors on the front - black, and back - silver), one rubber gasket, one washer, one hex screw, and two caps; All necessary components for a smooth setup
- Size from the Center of the Hole to the Tip: the hour hand is approx. 133 mm/5.2 inches and 116 mm/4.6 inches long, the minute hand is approx. 175 mm/6.9 inches and 160 mm/6.3 inches long; 2 second caps: 7 mm/0.28 inches; Suitable for a length of 16-18mm from the center point to the clock
- Clock Mechanism Size: total length of the shaft is approx. 23 mm/0.91 inches, thread length is approx 14.6 mm/0.57 inches; The diameter of the threaded shaft is 8mm/0.31 inches; The second jump movement is suitable for clock panel with a thickness of 9 to 13 mm (0.35 to 0.51 inches)
- Packaging and Installation: come with a specially designed blister cardboard box, easy to carry, when you install this clock movement kit, make sure that the hour and minute hand are parallel
- Easy to Install: the clock movement kits are easy to install, simple and elegant design, these replacement parts fit well with different styles of clock frame; And please check the size before buying Before purchasing, please verify dimensions by checking the diameter of your clock face and the size of the movement shaft for compatibility
