Technical Specifications:
ACC mode Input: 13V-36V | Output: 5V/2.1A
Surveillance mode Input: 11.6V-36V | Output: 5V/2.1A
Extension cable: 0.5meter(1.64 ft) length
Interface: OBD to USB
One button for Two work modes:
Mode "O":
ACC mode: When your car ACC is off, the OBD power cable will also power off after 5 minutes.
Mode "-":
Surveillance mode: When you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage), it will power off after 30 seconds
The low voltage protection for mode "-" protect your car from running out the battery, enable you have enough voltage to start the car for next driving.
Attention:
1.Please note that the car OBD, OBD2 power cable is only working for dash cams which range from 8V-36V,other voltage range is not supported. The voltage will be converted to 5V output.
2.This car charger adapter is suitable for 16pin OBD and OBD2 ports. It is only used for charging.
- 【Low Voltage Protecting】OBD2 dash cam power cable which has a built-in intelligent program control chip. Accurately detect the car battery voltage, constant12V/24V voltage to 5v. When the battery voltage is lower than 11.6V, will stops working to prevent the battery from wasting power.
- 【2 Mode with Switch Button】Mode Surveillance, realize really 24-hour parking monitoring. Mode ACC, the obd hardwire kit will power off after 5 minutes when car turns off. Any question, you can get the contact information through user manual.
- 【Plug and Play OBD Power Adapter】Dash cam power cable obd2 cable makes your 24-hour monitoring easier. No Wiring Fuse Operations, more convenient than all dash cam hardwire kit. Directly connect the OBD port with the dash car camera. This obd power cable is suitable for 16pin OBD and OBD2 ports. It is only used for charging.
- 【High Compatibility Car Cam Charger】Best dash camera power cable for Jeep Cherokee, Chevrolet, Toyota, trucks, etc., as long as you have the OBD Port. Specially designed for dash cam GPS navigator, DVR, radar detector and more usb port devices.
- 【Specification of OBD Camera Power】OBD camera power cable with usb port. The USB interface can be used to connect other adapter cables to adapt to more devices. Cable length: 0.5 meter(1.65 ft),Input: 12V-26V | Output: 5V/2.1A.
- 【Low Voltage Protecting】OBD2 dash cam power cable which has a built-in intelligent program control chip. Accurately detect the car battery voltage, constant12V/24V voltage to 5v. When the battery voltage is lower than 11.6V, will stops working to prevent the battery from wasting power.
- 【2 Mode with Switch Button】Mode Surveillance, realize really 24-hour parking monitoring. Mode ACC, the obd hardwire kit will power off after 5 minutes when car turns off. Any question, you can get the contact information through user manual.
- 【Plug and Play OBD Power Adapter】Dash cam power cable obd2 cable makes your 24-hour monitoring easier. No Wiring Fuse Operations, more convenient than all dash cam hardwire kit. Directly connect the OBD port with the dash car camera. This obd power cable is suitable for 16pin OBD and OBD2 ports. It is only used for charging.
- 【High Compatibility Car Cam Charger】Best dash camera power cable for Jeep Cherokee, Chevrolet, Toyota, trucks, etc., as long as you have the OBD Port. Specially designed for dash cam GPS navigator, DVR, radar detector and more usb port devices.
- 【Specification of OBD Camera Power】OBD camera power cable with usb port. The USB interface can be used to connect other adapter cables to adapt to more devices. Cable length: 0.5 meter(1.65 ft),Input: 12V-26V | Output: 5V/2.1A.
