The On/Off Switch is a spare part with the light kit, as the controller have power consumption when it is not use, it will drain about 7 mA current, so an on/off switch is very important to disconnect power when the bike was kept for long term storage. 1.The On/Off Switch include a 3M tape to stick the switch on where you want to install it. 2.There is a quick connector include for easy connection, Find the red power wire on the controller, take away the battery ring from the wire and use the quick connector to connect the power wire of the controller with the wire of the On/Off switch, please see the guild as below: Step 1: Gently insert stripped wire into the connector Step 2: Use the crimp to get the desired grip Step 3: Apply heat evenly unit the tube shrinks Step 4: Inspect your waterproof quality connection and the adhesive flows 3.In case you have not the crimp and the heater, you can simply twine the both wire together and wrap insulated rubber tape for safety.
The On/Off Switch is a spare part with the light kit, as the controller have power consumption when it is not use, it will drain about 7 mA current, so an on/off switch is very important to disconnect power when the bike was...
Similar Products
