UCTRONICS U6102 PoE Splitter for Raspberry Pi is to use with the Raspberry Pi models with PoE pins like Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B, so you can power the Raspberry Pi with an single Ethernet cable plugged in.
SPECIFICITIONS:
- Standard: IEEE 802.3at
- Input Voltage: 37-57V DC
- Output Power: 5V (3A Max) / 12V (2A Max) via on-board terminal block
- Total power budget: 25W
- Cooling: 25mm×25mm brushless fan
PACKAGE INCLUDING:
- 1× UCTRONICS PoE HAT for Raspberry Pi with cooling fan
- 4× screws
- 4× nuts
- 4× standoffs
- For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included).
- Output Power: DC 5V (3A Max) / 12V (2A Max) via the terminal interface reserved; Total Power Budget: 25W; IEEE 802.3at Compliant
- Over-temperature Protection: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high.
- NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector. UC-727 Rev. D version without 12V green connector.
- For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included).
- Output Power: DC 5V (3A Max) / 12V (2A Max) via the terminal interface reserved; Total Power Budget: 25W; IEEE 802.3at Compliant
- Over-temperature Protection: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high.
- NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector. UC-727 Rev. D version without 12V green connector.
