LEDMO LED Strip Light Non-Waterproof SMD2835 600LEDs 3000K 16.4Ft DC12V 15LM/LED 3 Times Brightness Than SMD 3528 LED Light Strip LED Ribbon for Kicthen Bedroom and Sitting Room Warm White

DIY Strip to Wire Quick Connection
Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.

Suitable for a variety of wire sizes
Stripping-free connectors usually have strict requirements on the wires, such as the standard wire 20 awg, 18 gauge can be well matched, and it is difficult to open again after closing.
These BL LED strip connector improves these shortcomings, 24 - 18awg standard or non-standard solid wire, stranded wire and fused wire can be applied. not only can be firmly clamped, but also easy to open and reuse.

Installation Tips:
Strip End:
1.Open the wire clip. It should snap open with just a little effort.
2.Insert your 8mm LED light strip inside the clip underneath the two contact prongs, making sure the + and - symbols align.
3.Snap the wire clip shut. Gently pull on the tape to confirm you've secured the strip inside the connector.
Wire End:
1.Separate 2 wires and stripping
2. Use a fingernail to press the two wires into the slot to clamp them.
3. Snap the wire clip shut. Pull on the wire to confirm you've secured the wires inside the connector.
If you have any problem about installation, pls feel free to contact me.

Package:
10pcs Strip to Wire Connectors (BL20B-8)

Easy connection: Join LED tape to wire without soldering; Suitable for 8mm width SMD 3528 2835 3014 5630 single color LED strips; Connects two-conductor flat cable to LED strip; Not for 10mm LED strips, 3528 RGB LED strips
Wire versatility: Works with 22 AWG, 20 gauge solid wire, and multi-core wire; Press stripped wire into slot for secure connection; Addresses issues of wire piercing and allows for reuse
High current capacity: Supports up to 6A current; Compatible with 5V, 12V, 24V LED strips; Enables longer LED strip connections with a single connector; Adjust extension distance and angle for board-to-wire input and strip-to-strip jumper configurations
Waterproof strip compatible: Remove silicon covering around solder area to connect waterproof LED strip lights; Expands lighting project possibilities
Package contents: Set of ten connectors without pre-attached wires; Strips and wires not included; Offers flexibility for 8mm single color LED strip installations
Easy connection: Join LED tape to wire without soldering; Suitable for 8mm width SMD 3528 2835 3014 5630 single color LED strips; Connects two-conductor flat cable to LED strip; Not for 10mm LED strips, 3528 RGB LED strips
Wire versatility: Works with 22 AWG, 20 gauge solid wire, and multi-core wire; Press stripped wire into slot for secure connection; Addresses issues of wire piercing and allows for reuse
High current capacity: Supports up to 6A current; Compatible with 5V, 12V, 24V LED strips; Enables longer LED strip connections with a single connector; Adjust extension distance and angle for board-to-wire input and strip-to-strip jumper configurations
Waterproof strip compatible: Remove silicon covering around solder area to connect waterproof LED strip lights; Expands lighting project possibilities
Package contents: Set of ten connectors without pre-attached wires; Strips and wires not included; Offers flexibility for 8mm single color LED strip installations

Top WaffleMaker Reviews

Biantie La 2-Pin 8mm LED Connectors Solderless Unwired Clips - DIY Strip to Wire Quick Connection for 12v 24v Single Color SMD 3528 2835 Tape Lights (Pack of 10);